1994 Chrysler Town & Country Logo

Related Topics:

A
Anonymous Posted on Apr 25, 2014

Howm do you change the headlight assembly on a 1994 town and country

How do you change a headlight assembly

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 30, 2008

SOURCE: How do I change the Passenger side headlight on a 2006 Town and Country Minivan

changing headlight assy. 2001 chrysler t&C

Ad

Anonymous

  • 16 Answers
  • Posted on Jan 09, 2009

SOURCE: changing headlights on 2006 Town & Country mini van

You can go to any store that has a automotive section and tell them the make and model of your vehicle and they will help you find the right bulb. It's fast and easy and very cheap.

Anonymous

  • 422 Answers
  • Posted on Mar 26, 2009

SOURCE: how to remove & clean headlight/foglight cover on

autozone has a chemical called blue magic that works pretty well, just use some really fine sandpaper and buff it with some blue majuc

Anonymous

  • 297 Answers
  • Posted on Jan 11, 2010

SOURCE: how do you change out a left side mirror assembly

1. Pop off the triangular piece that is just cosmetic on the upper flat part of the mirror where it is attached to the van.
2. Under this piece are two visible bolts which you will need a Torx driver to remove.

3. Open the passenger door all the way open and remove the 3rd bolt, which is exposed from the outside of the car.
4. Expose the wiring harness plug by doing the following:
a. Pull off the door weatherstripping along the top of the door and on the pillar (the part of the car to the left of the windshield) Do not completely remove the weatherstip - simply pull it away enough to execute the next step.

b. Remove the plastic pillar cover: it simply snaps in. Pull hard and it will pop off
c. Lift up the plastic cover over the speaker on top of the dashboard. This piece goes all the way across the dashboard. Simply lift it up enough to get your hands underneath it. There is no need to free it from the passenger side.

d. Follow the mirror wiring harness around the rear of the speaker (the side nearest the engine) and unplug it from the female connector at the right-rear of the speaker. There may be a wire clip at the left-rear of the speaker that you will need to get the wire out of.
5. Unplug the wire, remove the mirror, replace the mirror, reinstall everything

hope its work

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Replace entire headlight assembly 1994 Lincoln Town car

There are no flat rods on my 1994 Town Car. This is only on the newer models produced in 1998 and newer.
0helpful
1answer

How do I replace a headlight bulb on a 2009 Chrysler Town and Country?

No, not the whole ***'y. Access to the bulbs is from rear of ***;y, under the hood. The bulbs and electrical connector just pull out from back of ***'y (there might be a retainer ring holding it in place, easily removed), unplug, and install new bulb. Try not to touch the glass part of new bulb with your hands-it will shorten bulb life.
Good luck.
1helpful
1answer

How to change the headlight on a 1998 chrysler

One screw on top and two nuts on the back ,then you can take the whole headlight housing out.
0helpful
2answers

Instrument panel and turn signals were going out

check the multi function switch assembly (ie..turn signal stock) comes as a whole unit.
0helpful
1answer

I need to replace the headlight assembly on a 1999

I just popped one of mine off this evening looking for the fan relay. 10mm socket. One bolt at the top, 3 nuts behind each lamp. You may need to take the air intake out to get access to the nuts on the drivers side. That is another 3 10mm bolts, 2 of which you need to take out to get to the air filter anyway.
0helpful
1answer

Replacing low beam headlights

if equipped with sealed beam lights,remove screws from trim panel surrounding headlights.remove 4 screws from headlight bezel [silver rectangle that retains bulb] unplug connector.do not remove adjustment screws. halogen bulbs may be reached from engine compartment,behind light assembly.
1helpful
1answer

Need to replace the driver side headlight

there is 3 10mm. bolts that hold the whole lens in they are on top ,take these out and then pull out whole assembly this will make it easy to replace sorry it took long to get back to you!
0helpful
1answer

Changing headlights on 2006 Town & Country mini van

You can go to any store that has a automotive section and tell them the make and model of your vehicle and they will help you find the right bulb. It's fast and easy and very cheap.
2helpful
1answer

Remove and Install Headlight Switch in 1994 Lincoln Town Car

Disconnect the battery ground first
1. remove the trim strip from the left and right of the steering assembly
2. take the 12 screws that hold the dash panel
3. take a right angle tool and remove the headlight switch knob by inserting in slot at the back of the knob and pulling toward you and pulling the knob off , this will let you pull back the dash panel and expose the switch. Un- fasten the headlight switch bracket and un fasten the connector and inspect . Replace the switch if necessary , especially if it is burned. GOOD Luck
Not finding what you are looking for?

62 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...