Question about 1994 Hyundai Excel

1 Answer

My brake rotor is mounted behind the wheel hub on my 2004 GMC Canyon 4WD pickup. How do I remove the hub so I can get the rotor off? Tks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Your going to hate this answer. The wheel hub has to come off. This brake system was designed by Isuzu. Don't know what else to say, it's a lousy job.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get the rotors off the front of a 2004 Envoy 4WD?


You have to take the wheel bearing nut off the axle and pull the bearings with it.

Jun 17, 2014 | 2004 GMC Envoy

1 Answer

How to replace the routors on a 2006 gmc colorado 4wd


GM came up with a winner on this one.

You'll need to pull the knuckle remove the wheel bearing and then you will be able remove the rotor from the hub

Oct 13, 2010 | 2006 GMC Canyon

1 Answer

REMOVAL OF FRONT WHEEL BEARINGS


Front (4 Wheel Drive) To Remove:
  1. Raise and support the vehicle
  2. Remove or disconnect the following:
    • Tire and wheel assembly
    • Rotor (See: Disc Brake Rotor)
    • Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle
    • Electrical connection for the wheel speed sensor
    • Front drive halfshaft assembly (See: Halfshaft)
    • Hub and bearing assembly mounting bolts 4WD front hub 9308kg35.gif

    • Hub and bearing assembly
To Install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly
  2. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent
  3. Install or connect the following:
    • Hub and bearing assembly
    • Hub and bearing assembly mounting bolts and tighten the hub to knuckle bolts; Torque to: 133 ft. lbs. (180 Nm)
    • Front drive halfshaft assembly (See: Halfshaft)
    • Electrical connection for the wheel speed sensor
    • Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle and tighten the bolt; Torque to: 106 inch. lbs. (12 Nm)
    • Rotor (See: Disc Brake Rotor
    • Tire and wheel assembly
    Wheel lug nut tightening sequence gm_trk_sub15_wheel_lug_nut_tight_seq.gif

  4. Torque the lug nuts to specification
  5. Test drive the vehicle to confirm the repairs
prev.gif next.gif

Aug 03, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

How to change rear brake rotors 2004 gmc savana


Removal & Installation CAUTION Dust and dirt accumulating on brake parts during normal use may contain asbestos fibers from production or aftermarket brake linings. Breathing excessive concentrations of asbestos fibers can cause serious bodily harm. Exercise care when servicing brake parts. Do not sand or grind brake lining unless equipment used is designed to contain the dust residue. Do not clean brake parts with compressed air or by dry brushing. Cleaning should be done by dampening the brake components with a fine mist of water, then wiping the brake components clean with a dampened cloth. Dispose of cloth and all residue containing asbestos fibers in an impermeable container with the appropriate label. Follow practices prescribed by the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) for the handling, processing, and disposing of dust or debris that may contain asbestos fibers.

The brake rotor can be removed without separating the caliper from the mounting bracket.
  1. Release the parking brake.
  2. Remove 2/3 of the brake fluid from the master cylinder.
  3. Raise and support the vehicle.
  4. Remove the tire and wheel assembly.
  5. Remove the caliper and mounting bracket as an assembly.
  6. Hang the caliper and mounting bracket assembly from the suspension using mechanics wire.
  7. Remove the rotor. Slowly turn the rotor while pulling the rotor away from the axle. (15 series).
  8. Remove the rotor. Slowly turn the rotor while pulling the rotor away from the axle. (25 series).
    NOTE If the rotor is stuck to the hub, try using a slide hammer to free it.

To install:
WARNING Whenever the brake rotor has been separated from the hub/axle flange, any rust or contaminants should be cleaned from the hub/axle flange and the brake rotor mating surfaces. Failure to do this may result in excessive assembled lateral run-out (LRO) of the brake rotor, which could lead to brake pulsation.

  1. Thoroughly clean any rust or corrosion from the mating surface of the hub/axle flange.
  2. Thoroughly clean any rust or corrosion from the mating surface and mounting surface of the brake rotor.
  3. Inspect the mating surfaces of the hub/axle flange and the rotor to ensure that there are no foreign particles or debris remaining.
  4. Install the rotor. Slowly turn the rotor while pushing the rotor towards the axle. (15 series).
  5. Install the rotor. Slowly turn the rotor while pushing the rotor towards the axle. (25 series).
  6. Install the caliper and the mounting bracket as an assembly.
  7. Install the tire and wheel assembly.
  8. Lower the vehicle.

May 06, 2010 | 2004 GMC Savana

1 Answer

I replaced my brake rotors on a 2004 gmc canyon and installed new brakes. everything works great, however my abs light stays on now.


IF you installed the wrong brake rotors,without the ABS reluctor ring[if equipped],the light will come on.Second possibility is you damaged the ABS wiring to the wheel speed sensor.There is a harness to each wheel.

Apr 17, 2010 | 2004 GMC Canyon

1 Answer

How do you remove the front rotor on a 2004 canyon?


Jack the car up in the air and get it safely on jackstands.Then remove the front tires.Remove the calipers and caliper mounts.Then remove the center bearing cap, next remove the bearing tension nut, then the outer bearing will fall out with the washer.Last step is to firmly tug on the rotorand then remove the bolts in the center part of the rotor to split it from the hub.

Dec 22, 2009 | 2004 GMC Canyon

1 Answer

Cannot get the hub off to replace rotors on the 2004 chevrolet colorado the rotors are behind the wheel hub need to remove hub to replace the rotors is there someway to remove the hub


the rotors should be on the hub behind the wheel... you will have to remove the brake caliper and it should just pull off... may be a few clips on the wheel stud

Nov 06, 2009 | 2004 Chevrolet Colorado

1 Answer

How to replace 99 gmc 3/4 tom brake rotors


Removal & Installation
  1. Remove 2/3of the brake fluid from the master cylinder.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Remove the front wheel hub extension (dual wheel vehicles only).
    • Insert a drift or large screwdriver through the brake caliper into one of the brake rotor vanes in order to prevent the rotor from turning.
    • Mark the relationship of the front wheel hub extension to the hub
    • Remove the front wheel hub extension bolts
    • Remove the front wheel hub extension from the vehicle. It may be necessary to tap around the perimeter of the hub extension with a rubber mallet to loosen it from the hub
  5. Mark the relationship of the rotor to the hub.
  6. Remove the caliper and mounting bracket as an assembly.
  7. Hang the caliper and the mounting bracket assembly from the suspension using mechanics wire.
  8. Remove the rotor.
  9. If the rotor is difficult to remove due to corrosion in the hub area use the following procedure to remove the rotor (25 series only).
    • Clean all the surface areas and the threaded holes of contamination
    • Generously apply penetrating oil or the equivalent to the hub/rotor area
    • Insert (2) M10 x 1.5 bolts (jack screws) into the threaded holes of the rotor
    • Tighten both bolts evenly to force the rotor from the hub.
c3692a2.gif
To install:
  1. Clean all rust and contaminants from the both side of the rotor and the hub flange.
    NOTE If the rotor was removed using the jack screw method you must ensure that the hub flange is free of nicks or marks caused by this procedure. Remove all raised nicks or marks before installing the rotor.

  2. Install the rotor.
  3. Install the caliper and the mounting bracket as an assembly.
  4. Install the tire and wheel assembly.
  5. Remove the safety stands.
  6. Lower the vehicle.

Oct 25, 2009 | 1999 GMC Sierra

1 Answer

How to remove rotor on 2 wheel drive model


remove wheel,remove caliper and pads, remove caliper mount, unhook abs sensor wire behind inner fender and unclip harness, remove 4 hub bolts ,remove hub, unbolt rotor

Jul 05, 2009 | 2005 GMC Canyon

3 Answers

How to change front rotor on 4wd 2004 canyon


remove the 2 bolt holding the caliper hit the rotor with hammer rotor will get loose clean the hub of dirt or rust reassemble hope it help fixya our post thanks pierre if any other question dont hesitate thanks pierre

Jul 12, 2008 | 2004 GMC Canyon

Not finding what you are looking for?
1994 Hyundai Excel Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...