Question about 1997 Nissan Maxima

2 Answers

Where is the iac located on a 2000 nnissan maxima?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello nickamorales: My name is Roger and I will answer your question for you. Locate the air intake tube between the air filter and the intake manifold. Directly below the tube where it connects to the engine you will find the IAC valve.This will have a round round with a wire harness connected to it.
Shoulkd you need further help please just ask. Please rate the quality of the answer you received. This lets us know you received the answer you were seeking. Thank You for using Fix Ya. Roger

Posted on Jun 20, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 193 Answers

Its located on the throttle body.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the iac located in the engine compartment of a 2000 nissan maxima?


The iac is located on your tb. It has a brown and a green connector going into it. Its the green one. The brown one is for throttle position. Just know once u remove it. Only nissan can program it back to factory settings. Unless u are good with a multimeter

May 20, 2014 | 2000 Nissan Maxima

1 Answer

2000 nissan maxima iac replacement


Here's a link to your P0505 code.Here's what your iac valve looks like.It's connected to throttle body,easy to remove.I found this link about your problem,read and see if it helps.

Apr 06, 2013 | 2000 Nissan Maxima

1 Answer

I cannot locate the IAC on 2002 Nissan Maxima


It may not have one, or at least not one that is serviceable.
I show a part number for 2001 and older but not for a 2002.
You might want to contact a dealer to verify.

Aug 25, 2012 | 2002 Nissan Maxima

1 Answer

Nissian path finder 2000 code p0505


That is idle air control (IAC) system malfunction,it's causes may include:
IAC motor connector is damaged (check connector and pins for damage, and moisture);
One or more IAC circuits open or shorted to ground;
One or more IAC circuits are shorted to voltage;
IAC has failed; or PCM has failed
You can clearing the fault codes. Then unplug the IAC and start the engine. If the P0505 code doesn't reset, replace the IAC. It is internally shorting one of the IAC circuits. If the code DOES return after unplugging the IAC and starting the engine, then you know it isn't the IAC motor. Visually check the wiring harness all the way back to the PCM. You may need to visually inspect the harness by removing all the insulation off the wires. It is possible that the wires could be shorting to eachother or to other wires in the harness.

Hope this helpful.
greetings

Plus: DTC table click here.

Nov 10, 2011 | 2000 Nissan Maxima

2 Answers

Can the 99 maxima idle air control valve fit a 2000 maxima


If you have the 3.0L V6 yes. If you have the 3.5l V6 no.

Hope this helps.

Sep 07, 2011 | 2000 Nissan Maxima

1 Answer

How many hours would it take to repalce a IAC Valve in a 2000 Nissan Maxima?


truthfully about an hour and ahalf including relearning the idle air rate.

Mar 05, 2011 | 2000 Nissan Maxima

3 Answers

Speed sensor location on a Nissan Maxima 2000 gxe


There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver side wheel off and see the sensor on the top of the case of the transmission. A 10mm bolt is holding it in. Easy fix

May 20, 2010 | 2000 Nissan Maxima

4 Answers

I have a 2000 nissan maxima and the problem that i


Idle air control valves short out all the time on these models. You can ohm the motor to check it, but the down side to a shorted iac valve is that it shorts out the ecm if not repaired quickly. when the valve shorts, 12 volts is supplied directly to the ecm and burns the circuit board. The other option is the air flow meter, this is also a very common problem but typically a p0171/p0174 would be stored in self diag.

Jun 14, 2009 | 2000 Nissan Maxima

1 Answer

Can a cam sensor cause a hard start


Yes, cam sensor can cause a hard starting condition, but not that common on a 2000 maxima. I haven't replaced single one on a 2000 Max and I have one also (maxima that is) . Never had any problem with cam or crank sensors. I think that your problem is somewhere else, like IAC valve circuit. Just a tip. Its kinda hard to diagnose something over the computer, without Consult2 (Nissan scanner) beeing hooked up to the car and seeing what the car is doing while cranking for my self.

Oct 03, 2008 | 2000 Nissan Maxima

1 Answer

Dies on idle speed,not all the time but some times


Yeap, I would look in the area of IAC valve. However, be carefull. If your Maxima has A/T trans, than your car is set up with ECM (computer) controled engine mounts (electronic engine mounts, which move depending on engine load) to optimize vahicles performance. Those engine mounts seize up and BURN OUT the DRIVER in your ECM (computer) for the IAC circuit, resulting in car dying at times. So, if your car has A/T trans, check your engine mounts for operation with CONSULT2 (nissan based scanner). If mounts are OK, than I would look at the IAC valve and IAVL re-learn along with closed throttle position re-learn. Good luck.

Jul 28, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
1997 Nissan Maxima Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...