Question about 1994 Dodge Ram

3 Answers

Where is o2 sensor on 1994 dodge 1500 pickup

Where is the o2 sensor

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,982 Answers

O2 sensors on any vehicle are found either at the exhaust manifold outlet or within a foot or two of the outlet (looks like a spark plug with a thin wire coming out of it, screwed into the pipe) Main thing to remember is to always use anti-seize compound on the new one so you can remove it later. Some have two, one being closer to the converter, or, one on each side on v6 engines.

Posted on Jun 20, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 34 Answers

Look at exhaust pipes before & after cat sensor/s threaded into pipes

Posted on Jun 20, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 299 Answers

Should be one in each ehaust manifold and another downstream at primary cat covertor.

Posted on Jun 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were is o2 sensor circuit malfunction cylinder bank no. 1,sensor no .1 located ona 2001 1500 dodge pickup 5.3 L ENGINE


Located driver side before catalytic converter.

With a good scanner with graphic these are easy to check. They can be difficult to remove.


74247-lwkf1v0yj5icwdmwpd41c01d-5-0.gif The Bosch 1200 works good for me still ended replacing both catalitic convertors!!!

The trace is an indicator that the fuel control and O2 sensor are working.


shdfl8148c_zpsac6355fb-lwkf1v0yj5icwdmwpd41c01d-5-2.gif

o2b1s1-lwkf1v0yj5icwdmwpd41c01d-5-5.jpg $_1-lwkf1v0yj5icwdmwpd41c01d-5-9.jpg Hope this helps?

Jul 01, 2017 | Dodge Cars & Trucks

1 Answer

The pickup has no spark was going down the road and it just stopped running


Search Results

    "No start" Due to Pickup Coil Failure Inside Distributor ...

    repairpal.com > Problems > Toyota > Camry
    The pickup coil inside the distributor can fail and cause a no-start condition. ... checking reveals not only no spark at the plug, but also no spark going into distributor. ... the car runs great but only for about 10 miles. then it shuts down as if there is no ... The plugs have a weak spark when checked against the engine block.

    Car dies randomly, It turns over but no spark - 1989-1994 ...

    https://www.ifixit.com/.../Car+dies+randomly,+It+turns+over+but+n...

    iFixitf your engine cranks normally but will not start because it has no spark, or it stalls ... A bad pickup inside the distributor (on engines that have a distributor), a stripped ... Really old post but could you please tell me how I would go about checking if my ... When it all got down to it, one of the timing belt idlers had worn out and ...

    Dodge Ram 1500 Questions - 1994 dodge 5.9 just shut off ...

    www.cargurus.com > Questions > Dodge > Ram 1500

    CarGurusApr 12, 2012 - 1994 dodge 5.9 just shut off and wont start back up there is no spark or ... hall effect (magnetic pickup) in the distributor? ... So I ran power back to the wire and repaired the broken wire and she fired right up and is running darn good again. ... Ihave a 2000 dodge ram 1500 it died going down the road it is ...

    No Spark - 4.3L S10 Pickup - CarGurus

Dec 14, 2015 | Cars & Trucks

2 Answers

P0032 is the code. Where is the sensor? HO2S Heater Control Circuit High (Bank 1, Sensor 1)


this is the circuit for the heater element in your o2 sensor it is in your exhaust pipe it will be pre catalytic converter.

Jan 01, 2011 | 2008 Dodge Ram Pickup 1500

1 Answer

Dodge rm 1500 idles rough


Could be a restricted catalytic converter. Tap converter with hammer and see if it rattles. if does, replace it.

Nov 08, 2009 | 2004 Dodge Ram 1500

2 Answers

I have a 1994 toyota pickup with the v6. When you first start the truck and reach rpm of 1500 its wants to ack as if its starving for gas, but it you get on the gas hard it clears up. Once the truck is...


throttle may be dirty but toyota was buying these trucks back because the frames rot out a couple of my buddies recieved decent checks from toyota one bought a new truck and only owes 2000 dollars on the new one he used the check for a down payment something to check into if your interested

Aug 05, 2009 | 1994 Toyota Pickup

1 Answer

Location of O2 Sensors on 1996 Dodge Ram 1500 ?


Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on manifold, some further down on exhaust pipes.

Apr 15, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

I would like to know if they think it i s afuel sensor problem


May not be a too much fuel problem as a too little spark problem. Check fuel pressure regulator, dry off spark plug electrodes and check ignition system for proper spark. Do code check to give you some idea where you should be going with this... ignore any codes for O2 sensor at this point as it will be reading result of problem, not problem itself.

Mar 10, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1994 dodge ram 1500 5.2L


Code 11 "" No crank reference signal to the PCM. or bad Crank sensor. If no crank signal no spark and signal to the injectors.
Replace as soon as possible.

Jul 03, 2008 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
1994 Dodge Ram Logo

Related Topics:

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...