Question about 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

2003 ford f350 don't start

2003 f350 with 6.0 diesel don't start it has no codes the icp pressure is 1475 when cranking. It does have memory code p2614 and p2617

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

It is recommended to change the oil using the duty schedule (3000 mile; no later than 5000 miles) and replace the fuel filter every other oil change (no later than 10,000 miles).
Also empty the fule tank and use pure fule not with Biodiesel.

Thanks

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine rotates but will not start


need more info
crank speed
voltage at crank speed
engine light on or off
any codes
oil pressure gage at crank
if you have accses to 5000psi gage mount to right side valve cover
removed the icp sensor installed gage must get min 500psi 300rpm and min 10.9volts to fire up all info pertaning to 6 liter
diesel most common engine for f 350

Mar 10, 2011 | 2004 Ford F350

1 Answer

Do you know how to fix the code - P2285 (ICP) on a 2003 Ford 350 6.0 diesel truck


DTC P2285 indicates the injector control signal circuit is out of range
so its either the ICP sensor located ontop of the passenger valve cover
or an open or shorted wire between the pcm and icp sensor

Jan 26, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

P1211, P1249, P1280 fault codes on a 7.3 L turbo diesel


p1211=ICP Not Controllable-regulates oil to Injectors
p1249=Wastegate Fail Steady State Rate
p1280=ICP Circuit Out Of Range
All but p1249 deal with your High Pressure oil system that controls your injectors

Nov 09, 2009 | 2000 Ford F350 Super Duty Super Cab

2 Answers

2001 F350 7.3L Diesel won't start


I take it you have a crank no start issue, the fuel is injected by high pressure oil, no oil pressure no start, there are 2 oil pumps, low lube pressure and high injection control pressure (ICP) the injection system is hydraulic controls electric actuated fuel injection, if when you crank the engine over and the oil pressure guage goes up base pressure is ok, then its high pressure or the best thing I can say is pull codes and that can give me a good direction to send you in, there are many things that can cause that problem, if the fuel heater shorts out, the pcm and it are on the same 30amp circuit causin the same problem and still you would have proper fuel pressure readings.

Jul 13, 2009 | 2001 Ford F350 Super Duty SuperCab

2 Answers

1989 ford f350 diesel wont start


If the truck has good batteries and cranks well.--- There is a schrader valve on top of the fuel filter housing, (it looks like a tire stem valve) depress this valve while someone cranks the engine until you have fuel flowing out of this air bleeder valve. From that point, crank until it starts. Do not crank more than 30 Seconds, then let the starter motor rest. After you have this air out it usually startes in one or two tries.

When was the fuel filter last replaced? What precedded this no start condition? Was it running fine?

Agin, this truck must crank quickly in order to start

good luck

Dec 27, 2008 | 2004 Ford F350

2 Answers

2002 f350 wont start


i had to replace my oil pressure regulator sensor it contols the oil pressure required to have the injectors open and spit fuel, if you replaced it and still no start replace the the cam position sensor

Jul 20, 2008 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...