Question about 1999 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee laredo. transmission floor shifter button to engage and disengage hard to push in. now stopped being able to push in at all

Posted by on

  • Richard Scordino May 11, 2010

    Sure you have already tried spraying lube in there. next place to go is to get the console shift cover off and take a look at what's binding in there.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

Hit the shifter on the top with a good hit to push it down, sometimes the "T" handle will come up.
The handle comes up and out if you have to replace the bezel.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my 1997 Grand Cherokee Laredo slipping gears when starting up from a stop


slips in reverse too? (other shoe falls off......)
same answer for all a/t slush boxes.
linkage from shifter to box ok?>
check levels first.
check fuses, if TCM acts dead, (wont autoshift)
change the filter,
get it serviced.
if frisky, read the FSM and do the stall tests and the line pressure tests. otherwise get it fixed.

Jun 06, 2016 | 1997 Jeep Grand Cherokee

1 Answer

Replaced transmission seal then on 2 different occasions going down highway at bout 65 to 70 miles hour transmission kept shifting btween overdrive n drive come to a stop n take off didnt do it again...


Computer controlled transmissions can get confused at times, from my personal experience. If the problem doesn't happen again, I would ignore it. If it happens all the time, it's most likely the transmission computer. Other things could be the shift linkage, engine vacuum leak, speed sensor, etc... Hope this helps.

Sep 27, 2010 | 1999 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee tacometer reading???


Cruising rpm even after the OD has engaged has a lot to do with the differential gear ratio and tire size.
There will always be a variation between different vehichles due to that alone.
To see if the OD is working, at about 50mph, lightly touch the brake pedal. If the rpms increase for a moment then the OD was engaged. (touching the pedal momentarily disengages it...good thing to know when hill climbing!

Apr 27, 2010 | 1999 Jeep Grand Cherokee

1 Answer

How to shift into 4 LO in 2004 jeep grand cherokee


The correct procedure should be described in detail in your owner/operation manual.
For a 2004, 90 % sure that if it's a quadra trac you have to immobilize the vehicule, put your transmission shifter to neutral keeping foot on the brake obviously, engage the low on transfer case pulling the transfer case shifter, engage the transmission to drive
If it's a select track, normally you have to keep the vehicule moving very slowly (2 mph), move the transmission shifter to neutral, push the transfer case shifter to the right and pull it firmly. Once transfer case engaged, put back the transmission shifter to drive.
It could take few seconds to engage and disengage depending on the temperature and road condition. Do not try it on dry surface (preferable on mud, snow and wet surface). Drive at low speed because you will feel that it's very low geared.
By the way, follow the reverse process to reestablish normal mode

Hope it will help
Dan

Dec 21, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Cruise control no go when button is pushed


I press the control switch on my 1999 Jeep cherokee. the cruise light doesn't come on and the cruise does not engage. Please offer a solution.

Nov 14, 2009 | 1999 Jeep Grand Cherokee

1 Answer

How do i lock in the four wheel drive in my 2000 jeep grand cherokee laredo?


YOU SHOULD HAVE A SHIFTER NEXT TO TRANSMISSION SHIFTER,WILL IT NOT GO IN GEAR FIRST OFF.

May 10, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Jeep erradic in shifting


Check the adjustment on the brake switch. If the brake switch is not seated properly it will engage when hitting bumps and tell the tranny to come out of overdrive.

Feb 13, 2009 | 1999 Jeep Grand Cherokee

1 Answer

98 Grand Cherokee shifter wont stay in place (moves freely)


Give the shifter a good hard hit on the top. Sometimes it pops out of place.

Nov 15, 2008 | 1993 Jeep Grand Cherokee

3 Answers

CAN YOU TELL ME HOW TO USE A SLIM JIM TO UNLOCK JEEP GRAND CHEROKEE LAREDO. LOCKED KEYS IN CAR.


a slim jim is not a good ideal to be using in todays cars and trucks with airbags everywhere and wires inside doors..call a pro and if he pulls out a slim jim send him packin...there a re far better tools to use than a slim jim

Oct 24, 2008 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...