Question about 2006 Chevrolet Silverado 3500
I have to replace head gaskets on a lbz engine and I need to know if the turbo has to come off before I can get the intake off
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On 5.7L engines, install the bolts and torque in sequence as follows:
Posted on Mar 14, 2009
Hi: the 06 Duramax came with a LBZ, 18 mpg is normal, to improve it ... "chip" it, put in an "AirRaid air filter and a 5 inch exhaust. (cost about $1,000.00) Fuel mileage improved by over 30%.
Posted on May 22, 2009
its not the head gasket it is the intake manifold gasket and you can bypass all the throttlebody seal by removing all the wires and taking it off these are very bad at doin this cause they have a plastic gasket look up some pics on it it took my and a friend bout 5 to 6 hours to do but the shop wanted 700 dollars so that saved some money.
Posted on Jul 09, 2009
For 1988-1995 4.3L,5.0L and 5.7L intake manifold bolts are torqued to 35ft.lbs.Start with center bolts on each side moving out finishing with the bolts in the front of the motor and the back
Posted on Oct 24, 2009
Tips for a great answer:
Oct 31, 2015 | Cars & Trucks
Aug 23, 2015 | GMC Cars & Trucks
Feb 22, 2015 | GMC Cars & Trucks
Oct 10, 2013 | GMC Cars & Trucks
Mar 11, 2017 | 2006 Subaru Forester
Mar 28, 2011 | Chevrolet 2500 Cars & Trucks
Mar 16, 2011 | Volvo S80 Cars & Trucks
Oct 15, 2010 | 2006 Chevrolet Silverado 3500
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: