Question about 2004 Kia Amanti

Open Question

Parking break not releasing - 2004 Kia Amanti

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake pedal


Are you talking about the parking break? If the release won't work, gently press on the pedal with your foot will pulling on the release. At some point it should release.

Jan 05, 2014 | Cars & Trucks

1 Answer

My chevy blazer parking break paddle jammed


spray wd-40 on the gear and teeth mechanisem push the foot feet down for the parking break then pull the release. if that doesn't work then try grabbing the break cable with a vise grips and pull on the cable, the old one might have streached

Jun 03, 2012 | 2000 Chevrolet Blazer

1 Answer

Montana parking break won't release


does it have the lever or pedal for the parking brakes!!

Nov 27, 2011 | 2004 Pontiac Montana

1 Answer

Why does the parking break light stay on in my 97 Olds Cutlas Supreme. I have checked the level of the break fluid and it is full. I did have new break lines put in last year. I did have to slam on my...


Apply the parking brake with the vehicle parked, engine turned off and transmission in Park. Release the parking brake completely, then apply it again, and ensure that it is fully released. Turn the ignition on, check to see if the Parking brake warning light is on. If it is NOT on, apply the parking brake and check to see if the warning light comes on. If the light come ON wihen the Parking brake is applied,.....fully release the parking brake and check if the warning light goes OFF. If it does NOT go off, then an adjustment is needed at the parking brake switch.

Jan 09, 2011 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Parking brake release


There should be a manual release. Reach up along the parking brake pedal. Ford has a manual lever that you pull toward yourself to release the parking brake. Hope this helps our with your problem. Best of luck.
Greg

May 30, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Parking break light is on & Chimming When P. Break is released


On your parking brake assembly is a single wire switch. You can unplug it, but you will have to remember not to drive with it set. To replace the switch the whole assembly will have to come out. The switch is about $20 and labor should run about two hours. Good Luck

May 20, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Parking break wont release


I suspect the parking brake cables are rusted & corroded inside the cable housings. They are coated but they do freeze up.

Mar 11, 2009 | 1991 Ford Ranger Supercab

1 Answer

Parking break light is always on (1994 Toyota Previa)


If you look where the parking brake arm is you should se a switch that it pushes against . The switch should be right above the parking brake arm .

Feb 23, 2009 | 1994 Toyota Previa

Not finding what you are looking for?
2004 Kia Amanti Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...