Question about 2000 Buick LeSabre Custom

Open Question

Front end shaking during accelaration between 45&55 mph

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

carldc3
  • 82 Answers

SOURCE: Shimmy in the front of my 2000 Lasabre

you more and likely need a front end aliagnment and your tie rod ends maybe worn out

Posted on Mar 15, 2009

  • 7 Answers

SOURCE: I have a 1995 buick park avenue, its front wheel

sounds to me like you might have a bad tierod end or bad ball joint

Posted on Jun 14, 2010

  • 4793 Answers

SOURCE: While driving I make a turn around 45 mph and the

almost certainly a wheel bearing that is just about to break up.could also be track rod end if you have any play in steering.you need to jack up the car(wheel off the ground)and with your hands at 9-3 oclock, rock from side to side,any "play"will be OBVIOUS. enlist the "eye" or "hands" of a volunteer to help,makes it easier.

Posted on Oct 12, 2010

  • 160 Answers

SOURCE: The front end shakes &

ball joints.....bearings......i would think are more probable....or just needs alignment / wheel balancing real bad...

Posted on Jan 06, 2011

  • 148 Answers

SOURCE: At apprimately 35 mph, the

First thing you check are the tires for balancing and/or damage.

Posted on Feb 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The front end shakes very bad at 45 mph under rides real smooth brand new front end.what could it be?


Front end shake at a specific speed means the wheels are out of balance or alignment. Have this checked at a garage.

Nov 14, 2014 | Cars & Trucks

1 Answer

F350 4x4 frontend shake


Would you not think that you have worn suspension parts ?

Go to You Tube Video & see the problems with that vehicle,
& watch how to replace various parts

Sep 18, 2013 | Cars & Trucks

1 Answer

My 2007 Toyota Sienna shakes


ignition fault check replace spark plugs leads test it then coil packs

Feb 11, 2013 | Cars & Trucks

2 Answers

I have a 2005 Toyota Solara SLE. I having problems with the front end. The car shakes/shimmies upon accelaration at approx. 40 mph. It smoothes out if you take your foot aff the accelarator but shakes...


Check the condition of your tires and suspension. this problem is usually caused by bad component or alignment. Special attention is given to camber and caster.
alignment%2bchart3.jpg

Jan 21, 2013 | 2005 Toyota Camry Solara

1 Answer

I have a 96 dodge ram 1500, i tested it and pulled up codes po300,301,302,303,304,305,306,307,308 .. can someone tell me what these codes are?? also when i am driving and press on the gas while between...


PO301 -308 codes are cylinders1 -8 mis-firing. check the crankshafe sensor and the camshaft sensor. If you carry them to your local auto parts joint,they can test them. Shaking fr end suggests to me that your steering stabileser or ideler arm,( depending on 2 or 4 whd) needs to be replaced right away. Good luck, and happy motoring

Mar 29, 2012 | Dodge Ram 1500 Cars & Trucks

2 Answers

2004 yukon denali shakes a little in the front end at speeds 45 to 50 mph..almost feels like driving on a flat tire..what could be the prob?


the front wheels may need balancing or it could be a loose or worn tie rod end or other loose component on the front end, you will need get under the vehicle & have a good look & give the steering components & anything else a good shake to see if you can see anything loose or worn.........hope this helps......cheers.

Sep 07, 2011 | 2004 GMC Sierra Denali

1 Answer

When you drive 45 mph and above the front end shakes real bad


very good chance you will need tie rod ends, is there squeaking during turns? (ball joints) hit a bump at higher speeds and the car sways left and right? any other symptoms?

Feb 18, 2011 | 1993 Jeep Grand Cherokee

1 Answer

Shaking & rattling above 50 mph


have a tire shop balance your front tires.

Nov 26, 2008 | 1993 Honda Accord

1 Answer

Car shudders at 40-55 MPH


How about the CV joint?? were they inspected for wear??

Jul 05, 2008 | 1998 Dodge Neon

Not finding what you are looking for?
2000 Buick LeSabre Custom Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...