Question about 1987 Toyota Supra

Open Question

Vaccum guide - 1987 Toyota Supra

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater gets hot on defrost not on vents wont work on floor


if it is 4wd check the vaccum lines for the presence of atf, if so you need new ac vaccum lines, ac actuators, vaccum resivoirs, possibly a control head and a vaccum switch on the transfer case and top off the t case, if no atf found check supply vaccum on the black line on the drivside floor area, you have a supply vaccum problem where the break is you have to find, chek the vaccuum resivoir on the driver fender area

Jan 14, 2013 | 1999 Chevrolet Blazer

1 Answer

Re-installing a twin turbo boxer engine into a 94


CHECK OUT AUTOZONE.COM FOR BOTH OF THOSE ITEMS, JOIN UP_its free and safe_AND YOU CAN DOWNLOAD THE REPAIR GUIDE FOR THIS CAR WITH DIAGRAMS.....

Mar 08, 2010 | 1995 Subaru Legacy

2 Answers

1988 Pontiac Firebird - vacuum leak


go to autozone.com, become a member(completely free and safe) and then you can access their repair guide section which contains a vacuum diagram for your 'bird....you'll use that site a lot.....need to get yourself a haynes manual for your car-.....thanks for the question...ps- also check out a forum just for firebirds....hope this helps

Mar 08, 2010 | 1988 Pontiac Firebird

1 Answer

Need a diagram for the heating vacuum system


Should be a vaccum routing guide decal in the engine compartment either on the radiator support or underside of the hood. Check a haynes or chilton repair manual.

Jan 15, 2010 | 2001 Jeep Grand Cherokee

1 Answer

1989 ford f250 a/c only comes out through the defroster


More them likely you have a vaccum leak, check vaccum line that gose into fire wall under hood make sure it has vaccum, if don't find vaccum hose and repair, if it does check vaccum hose under dash follow it make sure it's plug in, if it is could be a bad vaccum pull off or bend door or the selector switch. Good luck hope this was helpful.

Dec 02, 2009 | Ford F-250 Cars & Trucks

1 Answer

NO HEAT ON FLOOR, I INSTALLED A NEW ACTUATOR BUT STILL NO AIR ON FLOOR SETTING , I HAVE THE SAME PROBLEM WITH MY 99 S-10. IS THERE A PROBLEM IN THE SWITCH WHICH CONTROLS THE DIFFERENT AREAS IN WHICH YOU...


The floor usally has a vaccum servo,so check it to see if the servo is moving.Pull the ac/heater control from dash,and remove the vaccum plug.Spray some silicone(silicone spray only)in the vaccum lines(plug)and the receptical for the plug.Do this while it is on,and engine running,this will unstick the vaccum switch if it is stuck.Also before starting this,check for vaccum at this vaccum switch.If there is no vaccum,go under hood and follow the vaccum comming out of firewall,and find a vaccum reservoir,or a vaccum check valve,and check them to see if they are damaged or not connected.I hope this helps,if you need more help let me know.

Oct 05, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Vaccum hoses on mitsubishi triton


go to autozone.com and click on repair guide, there hsould be instructions and a diagram there.

Nov 14, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...