Question about 1994 Plymouth Voyager

1 Answer

Radio/clock will not work. fuse 10 amp is good

Radio/clock will not work. fuse 10 amp is good and everything else is ok.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

There is usually 2 power sources to that stereo, one for when key on & one constant for radio memory & clock, you know that right? Check for that& Make sure it has good ground also. Use another ground source from back of stereo to metal just to be sure, if no luck, probably time for new stereo.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Radio does not work, everything else does, but the clock & radio


I was looking for help for you and noticed YOU posted this. Seems everyone claims it is the fuse. Try checking it with a meter. I'll bring one Saturday.

Dec 06, 2011 | 2007 Chrysler Town & Country LX New Cars

1 Answer

I'm looking for the indash clock wire connection for my 2000 Toyota 4Runner. I would prefer a photo. I was working on my aftermarket radio CD player and reinstalled it. The clock was working before that.


There is 1 fuse for the clock: If your audio system is working then that fuse is OK (instrument panel 18 15 amp fuse). Check it out just to be safe, you never know. If the fuse is OK then the clock itself has gone bad. I've heard of this happening after radio installs, no idea why. Anyway, I have clock removal instructions at www.autoclockrepair.com. I also offer a very affordable repair service with a lifetime guarantee.

Jun 05, 2010 | 2000 Toyota 4Runner

1 Answer

What fuse is for the clock in my 95 ford taurus


Clock Memory Fuse 8 and Digital Clock Fuse 6 .
--------
A/C Compressor Clutch Fuse 17
A/C Heater Control Switch Fuse 17
A/C-Heater Mode Switch Fuse 9
Air Bag Diagnostic Monitor Fuse 7
Air Bags Fuse 5
Amplifier Fuse 11
Autolamp Dual Coil Relay Fuse 4
Backup Lamps Fuse 5
Blower Motor Speed Controller Fuse 17
Clock Memory Fuse 8
Courtesy Lamps Fuses 6 & 8
Daytime Running Lamps Fuses 5 & 10
Digital Clock Fuse 6
Digital Instrument Cluster Fuses 5 & 16
EATC Blend Door Actuator [1] Fuse 17
EATC Blower Motor [1] Fuse 9
EATC Control Module [1] Fuses 5 & 16
Exterior Lamps Fuses 4 & 15
Flash-to-Pass Switch Fuse 10
Hazard Lamps Fuse 1
Heated Oxygen Sensor Fuse 5
Illuminated Entry Fuse 5
Illuminated Entry Module Fuse 8
Instrument Illumination Fuse 13
Keyless Entry Fuses 5 & 8
LCD Dimming Relay Fuse 6
Lamps On Warning Fuse 4
Lamp Out Warning Fuses 6 & 15
Liftgate Window Defrost Fuse 6
Liftgate Window Washer Fuse 6
Liftgate Window Wiper Fuse 6
Light Sensor/Amplifier Fuse 18
Low Oil Level Relay Fuse 18
Main Light Switch Fuse 6
Manual Lever Position Sensor Fuses 5 & 10
Mobile Telephone Transceiver Fuse 11
Police Accessory Relay Fuse 6
Power Antenna Fuse 11
Power Mirrors Fuse 8
Power Windows Fuse 6
Radio Fuse 11
Radio Memory Fuse 8
Rear Window Defrost Fuse 5
Redundant Radio Control Fuse 11
Shift Lock Actuator Fuse 5
Speed Control Amplifier Fuse 6
Speed Control Deactivator Switch Fuse 1
Stop Lamps Fuse 1
Transmission Control Switch Fuse 18
Turn Lamps Fuse 1
Turn Signals Fuse 5
Variable Assist Power Steering Module Fuse 5
Warning Chime Fuse 6
Warning Chime Module Fuse 18
Warning Indicators Fuse 18
Windshield Wiper Control Module Fuse 2
Windshield Wiper Motor Fuse 2.

-------
this will help.thanks.

Feb 20, 2010 | 1995 Ford Taurus

3 Answers

Brake lights not working even though the brake peddle is pushed down The switch still goes in and out. Fuse box has some fuses missing. The fuse box does not have a desription on every plug of what it is...


Here are the numbers on your fuseblock and fuses coresponding to the number that is on your fuse block.
1-20 amp (yellow)
Hazard flasher
2-10 amp (red)
back up lights, A/C clutch cycling Switch
3-30 amp (green)
Power windows
4-30 amp (yellow)
A/C or heater blower motor
5-20 amp (yellow)
Panel Lights, Side marker lights, Park, Taillights, Clock & radio display Intensity, License & panel lights.
#6-10 amp (red)
Stoplight, buzzers, Anti-lock brake module
#7-15 amp (lt. Blue)
Tachometer, horn & Relay
#8-8 amp (yellow)
Power Door locks
#9-10 amp (red)
Radio
#10-10 amp (red)
Rear Wheel Anti-lock module, Turn Signals
#11-20 amp (Yellow)
Windshield wiper & washers
#12-15 amp ( LT. Blue)
Cigarette Lighter
#13-5 amp (tan)
Speed Control, warning buzzers, gauges, indicator lights
#14-5 amp (tan)
Time/delay relay & under-hood light, dome light, power mirrors, readio & clock Memory, Interior lights, reading lights
#15-blank
Not used
#16-4 amp (pink)
Radio Lights & overdrive switch light 1989-91, Cluster lights, Cigarette Lighter light & as tray light, Cluster lights, A/C & heater controls.
#17-relay
Hazard Flasher warning
#18-relay
Relay
#19-Circuit breaker
#20-relay
Turn signal Flasher
#21-buzzer
Warning
#22-Relay
Horn

Aug 04, 2009 | 1991 Dodge Dakota

2 Answers

My Radio and clock screen has went blank volume and controls do not work the clock does not work the radio plays and CD plays but screen is dead. 2001 525I BMW


it sounds like the Multi information display has failed (MID). It is the long display with all the radio controls on it. If you want to find a known good part they are really easy to swap out. Just remove the radio knob and if you look down in there, there is a place to put a T10 (i think maybe bigger or smaller) torx T10 screwdriver.if you turn it while pulling back slightly on the screwdriver it should come right out. It usually is the component that fails but as always you may want to check your fuses.

Apr 22, 2009 | 2001 BMW 5 Series

1 Answer

1997 Isuzu rodeo radio and interior lights problem


I had the same problem today and checked all the fuses that I thought might be related to the ignition or radio. All of them looked fine, so I finally went through and checked all of the fuses. The culprit ended up being the 10 amp fuse in the interior fuse box. The owner's manual lists this one as the "Room" fuse, which I guess might translate to "cabin." In any case, everything is working fine after I replaced the blown 10 amp fuse with the spare from the fuse box.

Mar 14, 2009 | 1997 Isuzu Rodeo

2 Answers

94 Chev. Silverado


does the dome light and ciggerette lighter work still or is it all out?

Feb 26, 2009 | 1994 Chevrolet Silverado 2500

1 Answer

Clock on the console is not working.Checked the fuse says its ok.


If the fuse is OK then it is the clock itself. I offer an affordable repair service, check out
www.autoclockrepair.com

Feb 01, 2009 | 2002 Toyota Sienna

1 Answer

2005 Malibu MAXX car stereo dead, rear radio too.


Please check your owners manual for the location of the 10 amp fuse for the radio. On some models you have to reset the security feature on the radio/CD player for it to work.

The info below has been stated to work on a no go radio. I have not confirmed this procedure.

Remove the lower fuse box cover, with the power off, removed the 10 Amp fuse for the "Radio." the fuse may be good. Fuses are diagrammed in the owner's manual. With the fuse removed, start the car, turn the car off, replace the fuse and turn the key to "ACC" to see if the radio was "Reset."

Would the alarm cause the radio to malfunction? If your Anti Theft lock was activated check your owners manual under radio and check for a 4 number password. Sometimes it is taped to the upper part of the glove box. If you do not have the CODE you will need to take the vehicle to a dealership or a repair center. They use your vehicles vin number get the code.

Jul 21, 2017 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1994 Plymouth Voyager Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...