Question about 2000 Chevrolet Express Cargo
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You can remove door trim panels from inside the car, panel will come off even the door is closed.
Than put you hand inside door and pull levers to open door.
Posted on Jul 27, 2008
This was a lot easier than I thought. The underside of the door handle itself had cracked, where it grabs the teeth of the opening mechanism. We popped off the old handle, and popped on a replacement. Whammo. Thanks!
Posted on Nov 12, 2008
SOURCE: Door Panel removal
remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal door frame. Slip it in about 2 inches,. Slide it back or forth til you hit a stop. That should be a plastic pop in.twist metal tool to pull panel away from the door. It should pop away from door frame. Don't overdo it if it doesn't come out. try another spot. once you get one loose, you can tell how to get the others out. Once panel is loose push it upwards to get top lip out of window bottom. If it has power windows,disconnect plug. If it has manual windows, you will have to remove the window crank There is a snap ring behind window crank that has to be removed.push in on panel by window crank and you can see the ring.
Posted on Dec 06, 2008
On almost all GM's there will be a screw in the recess that the handle sits in. After removing this screw, gently wiggle this cup out of it's hole and there should be a metal rod attached to the back of it with a small clip. Unclip this and it's out - installation is the reverse. Just don't lose the clip or let the linkage rod fall down inside or you will have to remove the door panel. It shouldn't take five minutes to replace and most parts stores now carry GM door handle assemblies. Good Luck!
Posted on Jan 11, 2009
Tips for a great answer:
Jun 26, 2016 | Cars & Trucks
Jul 13, 2012 | Cars & Trucks
Sep 07, 2011 | Chevrolet Astro Cars & Trucks
Jan 31, 2011 | Chevrolet Express Cars & Trucks
Jan 03, 2011 | 1999 Chevrolet Express
Apr 06, 2010 | 2003 Chevrolet Venture Passanger
Dec 16, 2009 | 1998 Chevrolet Astro
Mar 23, 2009 | 1992 Chevrolet Astro Extended
Nov 11, 2008 | 1995 Chevrolet G20
May 30, 2008 | 1991 Chevrolet Astro Extended
10 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: