Question about 2004 Ford Freestar
CODE P0171 CODE P0174
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P0171 is system too lean bank 1, P0174 is too lean bank 2, and 302 is misfire bank 1. Look for vacuum leaks. If you don't find them, put a vacuum gage on it can check. The P0171 is almost always a vacuum leak. If not other possibilities are front O2 sensor is too old and should be replaced (if mileage is greater than 100k then replace). Try injector cleaner. Misfires are usually bad spark plugs, but could possibly be caused by insufficient fuel. I've never had a car of mine in bad enough shape to have that error.
Posted on Oct 24, 2008
SOURCE: 4 codes P0171,P0174,P2195,P2197
171 system too lean
174 system too lean
2195 - 02 ozygen sensor signal stuck lean Bank1 Sensor 1
2197- 02 ozygen sensor signal stuck lean Bank 2
The 2 front 02 sensors are located on the front of
the exhaust manifold.
Should solve problem and increase gas mileage.
Posted on Apr 01, 2009
The P0420 code is a Catalytic converter efficiency code check the compression.Swap the #1 injector to a different location to see if the code follows.Test the coilpak. A cracked exhaust manifold is the most likely cause p0171 and 0174 Induction air leaks, vacuum or some kind fuel restriction, weak fuel pump, restricted fuel filter etc.You also could have an exhaust leak near the upstream o2 sensor. If youtake it in they will probably use smoke to find out where the leak is.
Posted on Apr 22, 2009
SOURCE: P1507 P0171 & P0174 error codes
p0171 indicates the system is running lean on bank 1,p0174 means the system is running to lean on bank 2 p1507 is an idle speed under run fault i'd suspect an air leak is the cause of your problem check air intake system for airleaks
Posted on Aug 06, 2009
SOURCE: What is the code P1451 solution?
P0171 - System too Lean (Bank 1)
P0174 - System too Lean (Bank 2)
P1451 - EVAP Control System Canister Vent Solenoid Circuit Malfunction
I'm afraid I don't have enough info to tell you how to fix the P1451 but I'm certain it's the cause of the other two codes.
Posted on Jun 08, 2010
Tips for a great answer:
Jan 27, 2016 | Cars & Trucks
Aug 08, 2015 | Jaguar S-Type Cars & Trucks
Sep 27, 2013 | 1999 Ford Explorer
Jun 27, 2012 | 2001 Ford Windstar
Jun 29, 2017 | 1996 Ford Thunderbird LX
Sep 17, 2010 | 2001 Lexus RX 300
Aug 10, 2017 | 2000 Ford Windstar
Aug 03, 2010 | 2005 Ford Freestyle
System Too Lean (Bank 2)
Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust.
Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time.
Dec 17, 2009 | 2002 Ford Windstar Cargo
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: