Question about 2007 Ford F-150 Super

Open Question

Banging noise when turning the ignition on my f150

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Ford F150 300 Inline 6 Cylinder just goes Click when i turn the Ingnition


if solenoid is clicking may mean its working and problem is dead spot in starter ---but test and check them with a meter

Jun 13, 2017 | 1996 Ford F150 Regular Cab

1 Answer

What will cause my 1994 f150 with 5.8 has a ratteling noise on passenger side when i hold the brake in gear and give a little gas


on the outside?crawl under truck,and bang on catylitic converter,the core inside can break loose and cause a rattling sound,90s dodge v-8s do this alot too

Apr 09, 2014 | 1994 Ford F150 Styleside Supercab

1 Answer

I can't figure out the banging noise coming from center underneath dash When I drive it down the road, no noise until I turn from left to right. If I turn it left to right and apply brakes there is no...


big bang theory.

Ok, I've never heard of this happening to someone. If you turn left or right and apply brakes there is no noise. That means that the front end is probably ok. If it doesn't seem loose that way.

If you have a Sears nearby take it to them so they can listen to this banging.

They probably won't charge to look at it.

Jul 09, 2010 | 1996 Pontiac Grand Am

1 Answer

I have a 1998 f-150 4.2l v-6 tryed to start it today it turned over and did not catch. turned key to try again it bumped the starter but would not turn the engine over. I tryed jumping it but I knew I had...


When you say 'it bumped the starter but did not turn the engine over' and 'it bangs the starter' it sounds like you mean it hits the flywheel and will not turn the engine. If it engages and does not turn the motor you need to try to manually turn both directions. Do not have the key in the ignition. If it won't turn you may have a froze up motor.
If you mean the starter spins freely but won't engage the engine - than you need a new starter. Let us know what you find out.

Mar 06, 2010 | 1998 Ford F150 Regular Cab

2 Answers

Ford 1995 F150 Truck. Turn ignition key off but Truck still runs


ignition switch electrical portoin above brake pedal on steering column

shack

Apr 14, 2009 | 2004 Ford F150

1 Answer

Ford F150 FX4 2004 Front Hub Noise


have your cv shat checked or changed, those clunking noise is a sign of "constant velocity"CV joint failure, sometimes the noise stops because it is caused by damaged bearings. you should have it checked or changed before it fails on you, once this happens you will not be able to move your vehicle unless towed.

Mar 20, 2009 | 2004 Ford F150

Not finding what you are looking for?
2007 Ford F-150 Super Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...