Question about 2007 Nissan Frontier SE Crew Cab
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 nissan frontier 4x4
Well since the lights are controlled by the OBD (on board diagnostics), you'll have to reset it. You may be able to do this by simply disconnecting the battery for a few hours. However, a lot of newer vehicles have electronically locked radios which require the manual to be able to be re-enabled.
I'd check out the radio before disconnecting the battery.
The only other ways are to physically disconnect the lights in the dash or get someone with an OBD reader to clear the codes.
Posted on Sep 13, 2008
check all the tire pressures first.... then drive it for the next 10-15 miles to reset it.... it worked in my frontier ... I had the same problem as well
Hope that helped
Nissan tech +6 years
Posted on May 06, 2009
The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.
Posted on May 04, 2010
There should be a way to reset any car alarm. If the problem persist the alarm will come back on. Most alarms probably have more to do with the sensor system than actual problems. Of course that means you have to pay the dealer to "fix" a problem you don't have. Exasperating! They should pass a law that allows a car owner to reset his alarm system.
Posted on Feb 15, 2012
Tips for a great answer:
Jan 24, 2017 | Nissan Frontier Cars & Trucks
Jan 25, 2016 | 2011 Nissan Frontier King
Jul 20, 2014 | 2007 Nissan Frontier SE Crew Cab
May 13, 2014 | 2007 Nissan Frontier SE Crew Cab
Apr 26, 2014 | 2007 Nissan Frontier SE Crew Cab
Jan 04, 2014 | Nissan Frontier Cars & Trucks
Apr 05, 2009 | 2007 Nissan Frontier SE Crew Cab
Oct 24, 2008 | 2007 Nissan Frontier SE Crew Cab
31 people viewed this question
Usually answered in minutes!