Question about 2005 Infiniti QX56

Open Question

I own 2005 Infinity Qx56 and recently i have knocking noise from the transmission while shifting gearsto low, this occurs when engine is warm

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pingman37
  • 58 Answers

SOURCE: 2005 INFINITY QX56

There is an info button. Press that button repeatedly until you get to maintenence. Once there, use the directional knob and toggle down to oil and press ok, from there it should either give you a reset tab to highlight and press ok, or highlight the mileage bar and toggle left until it is back at 0. If you have any trouble let me know and I will walk you through it. 

Posted on May 27, 2009

Ad
  • 1986 Answers

SOURCE: Shifting Problem

I believe you have to use the shift release button to shift out of park and back into park. This is a safety feature to prevent accidental shifting of the selector while the car is stationary

Posted on Sep 14, 2009

duane_wong
  • 6826 Answers

SOURCE: my back brakes are making noise, what type of

Try your parts store for this one. They have a wide range of different brake pads for your vehicle with prices going up for the better ones.

I use Wagner on my 1997 Cadillac deville that do not require shims as they are built in.

These are fool proof pads.

Good luck to you...

Posted on Jul 05, 2010

  • 5537 Answers

SOURCE: 2004 infinity qx56 it accelaratets when shifting down

Check under Automobile.com site for product safety conditions. The NHTSA will show complaints and resolutions on this site. The technical service bulletins are numbered. If, after you enter all the info about your problem and compare it to past reports, you can get the number of the Resolution to the Dealer. Use every bit of ID the site shows for the solution.

Many times it shows if this is a free repair. You can also REPORT a problem to the NHTSA for investigation.

This can be catagorized under unintended or runaway acceleration. It may be listed under Engine, Controls, or under which part is causing the problem.

In general, it is odd to pickup speed while downshifting. The lower gears would cause the engine to rev up without making the car move faster. If this happens only when the Cruise control is being used, discontinue using the cruise. It is the only part that will open the throttle to maintain speed.

Posted on Sep 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HELP!! I have a 2005 infinity qx56 the rear ac isn't blowing but the front one is. What should I do?????


Could possibly be the rear blower motor unit and/or rear blower motor resistor, if it is separate from the rear blower motor unit.

Seeing the age of this question, was this the issue? Or, was it something else?

Mar 15, 2015 | 2005 Infiniti QX56

1 Answer

Gearbox knocking noise when shifting down


check for failed rear mount under gear box or check engine mounts and reaction rod bushes.

Apr 21, 2014 | 2005 Infiniti QX56

1 Answer

2005 Infinity Qx56, 4x4 isnt working. The 4x4 low light blinks


if you switch to 4X4 electric motor drive the link to engage 4HI or 4LO after you switch to 2HI sometimes sift to revers,neutral and back to drive.you need to relies pressure from the transfer case.

Mar 28, 2014 | Cars & Trucks

1 Answer

Bad oil pump ?


Turn your A/C off, the compressor can make noise if bearings are dry or system is low on compressor oil.
Remove your serpentine belt. Turn pulleys by hand to check for roughness. Bearings in those pulleys routinely go bad.
You may get computer warnings with the following test, but with serpentine belt removed, run engine for 2 or 3 minutes. Do this on a warm engine after serpentine belt is removed. The warm oil will not mask the problem like cold thick oil can. Noise generated means problem is internal.
If this is a stick shift transmission sometimes the clutch bearing can make noise and is a sign that bearing is bad.

May 13, 2013 | Ford Focus Cars & Trucks

1 Answer

Recently on our 2005 volvo s80 we get a knocking/ticking sound after car warms up and can not hear it when engine is revved.check engine light also came on.oil was also very low.engine code is exhaust...


The low oil condition is unrelated. It might just be using/leaking more oil than you think.. The noise is an exhaust valve solenoid issue as you stated.. The system is quite complex and I would suggest you have someone with experience look at it. You might double check that all the vacuum hoses under the hood are hooked up properly, a loose one can cause some noise as you suggested.

May 02, 2011 | 2005 Volvo S80

1 Answer

My back brakes are making noise, what type of brake pads are used on QX56 infinity 2005


Try your parts store for this one. They have a wide range of different brake pads for your vehicle with prices going up for the better ones.

I use Wagner on my 1997 Cadillac deville that do not require shims as they are built in.

These are fool proof pads.

Good luck to you...

Jul 05, 2010 | 2004 Infiniti QX56

1 Answer

Loses power after it warms up. Has a knock like low on oil. Have to down shift to lower gear to get power. 1987 Dodge Dakota 4 cyc, standard shift


When you are low on oil you should hear an engine "ticking" noise at the top of the motor. If you hear an engine "knock" or repeated thud with a metallic sound, your engine will very likely require a significant repair or replacement. There is another possibility that you could have a broken timing chain but normally the engine would not stay running if that is the case. I would suggest you have an engine shop mechanic (not dealership) diagnose the knock and estimate a repair.

Apr 10, 2010 | 1987 Dodge Dakota

1 Answer

2005 vw beatle trans is sliping .is this this major? or just low on fluid ? cant check it w/out a dip stick.


Yes and yes. Are you sure it doesn't have a dipstick? Engine is transverse/sideways, transmission is on driver side? Normal transmission check is; warm transmission, engine running, hold brake, shift through all gears, put back in park, engine still running, pull dispstick, wipe and check dipstick again. Should be near "warm" markings.

Mar 30, 2010 | 2005 Volkswagen New Beetle

Not finding what you are looking for?
2005 Infiniti QX56 Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...