Question about Toyota RAV4

Open Question

WHAT IS THE NORNAL FUEL PUMP PREASURE OF RAV 4

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 400 Answers

SOURCE: I'm working on a 2000 chev suburban with 6.0

The rear only supplies fuel to the front tank. The front tank has the high pressure pump in it, to supply the fuel rail.

Posted on Dec 05, 2009

Testimonial: "Thank you, very much. "

Ad
  • 701 Answers

SOURCE: Easiest way to change a fuel pump oa a 1999 toyota

Hello mm500539: My name is Roger and I will help. To locate the fuel pump you will need to remove the left rear seat. Remove the carpet. Remove the access cover in the floor pan. Drain off the fuel pressure as it should be under pressure. Do not expose to any spark or flame. Remove the screws holding the fuel pump unit in the fuel tank. Change the pump and reverse the procedure the reinstall the unit. Should you need further help please just ask. Please rate the answer you received as this way i know it was helpful. Thank You for using Fix Ya. Roger

Posted on Jan 08, 2010

duane_wong
  • 6826 Answers

SOURCE: where is the water pump

Water Pump REMOVAL & INSTALLATION 5VZ-FE Engines Fig. 1: The water pump is located on the front of the engine block, behind the timing cover 93163p92.jpg
Fig. 2: Once the retainers are removed, pull the pump away from the block 93163p97.jpg
Fig. 3: Scrape any remaining gasket material from the block before installing the new pump 93163p98.jpg
Fig. 4: Water pump mounting bolt locations 93163p88.jpg
Fig. 5: Front view of the water pump and thermostat housing 93163p99.jpg
WARNING
This procedure requires the removal of the timing belt. This is an extensive procedure requiring precision work, particularly at assembly. For more information, refer to Timing Belt Removal and Installation. Do not attempt to remove the belt without consulting the procedure; extreme engine damage may occur. Fig. 6: Apply sealant to the areas shown 86823pi7.gif
Fig. 7: A and B bolt locations 86823pi8.gif
Fig. 8: Exploded view of the water pump arrangement — 5VZ-FE engine 93163g19.gif

  1. Drain the cooling system.
  2. Remove the timing belt. For additional information, please refer to the following topic(s): Timing Belt Removal and Installation.
  3. Remove the idler pulley.
  4. Remove the thermostat.
  5. Disconnect the oil cooler hose from the pump.
  6. Remove the seven bolts and the tension spring bracket and then remove the water pump. To install:
  7. Clean all parts well. It is good practice to carefully clean all threaded openings, especially those exposed to coolant to remove rust and scale so at assembly, an accurate torque reading is obtained. This is important since gasketless applications like this depend on even clamp loads from the fasteners to avoid distortion and leaks. Remove any old sealer (Toyota calls it packing) from the pump and mounting area of the engine. Keep oil off the mating areas.
  8. Apply Formed In Place Gasket (FIPG) sealer to the pump-to-block mating surface and then tighten the bolts marked A in the illustration to 13 ft. lbs. (18 Nm). Tighten those marked B to 14 ft. lbs. (20 Nm). NOTE: The parts must be installed within 5 minutes of application of the sealant. Otherwise you must remove and reapply the sealer.
  9. Connect the oil cooler hose.
  10. Install the thermostat with a new gasket.
  11. Install the idler pulley.
  12. Install the timing belt.
  13. Install the drive belts and adjust the tension.
  14. Refill the cooling system and check for leaks.
2RZ-FE and 3RZ-FE Engines
  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. If equipped with an air conditioning compressor or power steering pump drive belts, it may be necessary to loosen the adjusting bolt, remove the drive belt(s) and move the component(s) out of the way.
  4. Remove the fluid coupling with the fan and water pump pulley.
  5. Remove the water pump. To install:
  6. Clean the gasket mounting surfaces.
  7. Install the replacement water pump using a new gasket.
  8. Install the water pump pulley and fluid coupling with the fan.
  9. Install the removed engine drive belts.
  10. Fill the cooling system.
  11. Connect the negative battery cable. Start the engine and check for leaks.
  12. Bleed the cooling system.
1FZ-FE Engine Fig. 9: Exploded view of the water pump mounting on the 1FZ-FE engine 86823pk0.gif
Fig. 10: Detach the oil cooler hose from the clamp on the fan shroud 86823pk3.gif
prev.gif next.gif

Posted on Jul 13, 2010

  • 47 Answers

SOURCE: Where is the fuel pump

The fuel pump relay is located behind the driver side kick panel. Thanks79201655

Posted on Apr 15, 2011

  • 477 Answers

SOURCE: could fuel pump relay cause 2007 toyota rav 4 not to start

possibly but without further details we can not diagnose the problem

Posted on Sep 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have fuel delivery problems on 96 rav 4, originally thought it was fuel pump untill i manualy actuated fuel pump relay that is located under dash and heard the fuel pump engage. pump still does not come on...


Check the 7.5A IGN FUSE in the fuse block. The circuit opening relay (RB#5) and the EFI main relay (RB#6) have to close to activate the fuel pump.

Jan 11, 2014 | Cars & Trucks

1 Answer

Where the fuel pump located for toyota rav 4 98


When you have fuel injection, the pump is usually in the gas tank.

Jan 21, 2013 | Cars & Trucks

1 Answer

Where is the fuel pump relay located on a 97 Rav-4?


The fuel pump relay is located behind the driver side kick panel. Thanks79201655

Apr 15, 2011 | 1997 Toyota RAV4

2 Answers

Start up is rough idle and chokes on acceleration for about 4 to 8 miles then smooths out


sounds like dirt in fuel buy a good fuel cleaner and put it through the fuel system should solve the problem after some miles.adrian,,,,,,,

Aug 19, 2010 | Ford F-250 Cars & Trucks

2 Answers

How to replace a fuel pump on a toyota rav4 1998


you need to remove the rear seat to get to it, just keep in mind the system is preasurized, which in english means you need to loosen the fuel filter in the front of the car first, "THIS IS CRITICAL" if not you will cause gas to get all over the interior. The 96-00 rav4 has a hatch under the carpet, under the seats in the rear. it is a pain to get to, once you remove the seats and carpet you will see it. I would recomend you bring it to a dealer if you dont know what you are doing. But if you are like me and figured what the hell, then you will want to take these steps first...
1. Let the car sit for a long period of time, about 3 hours or more.
2. Have a low amount of fuel, do not have a full tank
3. loosen the gas cap
4. Remove the intake, and the fuse box,
5. Loosen the top nut on the fuel filter under the hood to let out the remaining pressure, do not loose the O rings. This is a good time to replace that filter too, it is about 30 bucks from toyota.
6. open the hatch in the rear,
7. remove the electric feeds from the pump.
NOTE: YOU CAN REMOVE THE POWER FROM THE PUMP AND START THE CAR TO TAKE OUT THE PREASURE, BUT I FOUND IT BETTER TO DO IT MY WAY DUE TO WHAT IT TAKES TO START IT AFTER YOU DO THIS.
8. line the floor of the rav with Plastic, bags, or cardboard, or something.
9. remove old pump
10. install new pump
11. Re attach the fuel filter or install new filter
12. get car back together enough to start it, make sure you have all the lines connected, if not gas will get everywhere...
Good Luck, it was a FUN adventure to do this...

May 05, 2010 | 1998 Toyota RAV4

2 Answers

My 2002 Rav4 D4D seems to intermittently struggle to pick up speed on slight uphill gradients on motorways. Even if I have my foot bedded down it does not pick up and loses speed. Sometimes whilst...


it could be many things, fuel filter may be clogged or fuel pump is weak and not pumping enough fuel preasure or may need a tune-up. may have arching coils or plugs,

Jan 21, 2010 | 2002 Toyota RAV4

1 Answer

Fual pump relay heating up then fuel preasure drop and vehicle dies.


Check the ampage on your fuel pump, it shouldn't be lower than 4- 5 amps. If it is too high, the motor is going bad in your fuel pump.

Nov 10, 2009 | 1987 Ford F 150

1 Answer

Not getting fuel to my rav 4 1996.where is fuel filter located on rav 4 1996.how do I change it,assuming that is the problem in view of the fact I have a spark?cheers, Ray


Filter should be on drivers side of passenger side of car directly between the doors. To change shut off fuel pump relay switch in trunk, remove the clips and change the filter.

Jun 29, 2009 | 1996 Toyota RAV4

2 Answers

MY 1989 chevy silverado pulsates or urges in Idle. It allso does it from zero to 35mph then smooths out. problem is intermitent.


My fathers did the same thing. we soon figured out that the injectors were not making an even mist of fuel they were just dumping the fuel in. we replaced the injectors and the problem was fixed.

Dec 26, 2008 | 1989 Chevrolet Silverado 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...