Question about 1988 Mitsubishi Pickup

Open Question

Tappet adjustment how do you adjust tappets inlet valves only?

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: tappet/valve settings???

o.25mm when hot this is for inlet and outlet

Posted on Feb 11, 2009

Ad
  • 608 Answers

SOURCE: how to measure tappet clearance with dial gauge

When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Posted on Mar 25, 2010

  • 12 Answers

SOURCE: What is the adjustment of valve tappet clearance

12 thou

Posted on Sep 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi have a f22b3 1995exi was wondering if any one nows the specs on the tappet gaps .Also can u adjust them and advance the motor ?? Wanna put it in a motor carna


the valve timing on a motor is set and cannot be altered. The length of time that the valves are held open is determined by the lift of the cam and this period of time that the valves are held open determines how much mixture is allowed into the cylinder. If you advance the cam shaft you may gain extra mixture and a bit more power but on a single cam the exhaust valve timing is altered and so the advantage of the advance is lost. If you want more go from the motor get specially ground cam shafts ( hot cams) As to tappet clearance, if you have hydraulic lifters then they self adjust and thee is no clearance measurement. If you can adjust the tappets then most engines run .010" hot inlet and .012" exhaust hot Setting the tappets closer means that they open sooner but they also close sooner so the amount of mixture is reduced as the time for the mixture to enter the cylinder is reduced.

Oct 30, 2014 | Cars & Trucks

1 Answer

Citreon saxo tappet clearance


You didn't mention what year so if the vehicle is early then standard settings are .010"inlet hot and .012" exhaust hot. If late model it will have hydraulic tappets. which are self adjusting

Aug 15, 2014 | Cars & Trucks

1 Answer

Kia carens problems


Tappets......... perhaps is what your friend said. The tappets are part of the engine inlet and exhaust valve set up. Most tappets are self adjusting in modern motors, (Hydraulic).
The old fashioned tappets are manually adjusted during regular car servicing. This happens at set intervals, for instance every 20,000 miles.
Inlet valves allow air and fuel into the engine and exhaust valves let the burnt fuel and air out.
Tappets are fitted between the inlet and exhaust valves, they ensure that the valves open on time and more importantly close properly. If the tappet happened to be badly adjusted and did not let the valve close properly then damage to the valve and cylinder head can happen by burning.
If you have a significant power loss I would be surprised to find that the just tappets/valves were to blame.

Jan 26, 2014 | Cars & Trucks

1 Answer

I need the tappet settings for a peugeot 207


inlet valves are set at 0.20mm, exhaust valves are set at 0.40mm, adjust them with the engine cold.

Nov 28, 2013 | Peugeot Cars & Trucks

1 Answer

Adjusting tappet clearance


If you have adjustable tappets bring the engine to top dead center no 1 piston firing The rocker will be on the back of the cam lobes. Inlet .010" hot exhaust .012" hot and then turn until next firing piston is in position. Go by firing order. I suspect that a 1997 model would have hydraulic adjusted tappets which means no manual adjustment. If it is rattlly I would be checking for worn rocker shaft and rocker bushes.

Apr 02, 2013 | 1997 Nissan Pickup

1 Answer

Tappet clearance on 2ct turbo diesel in tarago


I suspect that it would have hydraulic tappets and there fore automatic valve adjustment.. As a rule of thumb inlet .010" hot and exhaust .012" hot

Mar 28, 2013 | Cars & Trucks

1 Answer

What is the valve settings


If you have adjustable tappets the setting are usually .010" hot inlet and .12" hot exhaust. Start at 12 and 14 cold and recheck when hot. If you have hydraulic tappets there is no adjustment as they automatically adjust when oil pressure is achieved

Jan 26, 2013 | Cars & Trucks

1 Answer

Its a 92 1.4 RT. Noisy tappets. Am about to change oil and filter and wish to check tappet gaps as well. Please assist.


12th inlet 14 exhaust for the valve clearances ,adjust by the rule of nine that is number one down adjust number 8 -----number 2 down adjust number 7 ---and so so so every adjustment adds up to 9 ,simple when you know how isnt it

Aug 24, 2011 | Renault Le Car Cars & Trucks

1 Answer

What is the tappet clearance on a honda accord type r 2.2


if manual adjustable tappets then 12 inlet and 15th exhaust will suffice but isnt this vehicle fitted wth hydraulic adjusting tappets??

Jun 15, 2010 | 2000 Honda Accord

2 Answers

Can you set valve clearances on a 1997 clio 1.2 engine.my engine sounds as if the tappets are noisey.


The tappet clearence should be in the owners handbook but it's a bit early a tappet noise from the engine (2006) ! Check oil level and change if it's overdue a service is definately worth a look ! Good luck

Apr 16, 2010 | 2006 Renault Le Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...