Question about 2005 Dodge Neon

1 Answer

Emergency Lights My turn signals will work. I have replaced the flasher and the turn signal switch. The turn signals will work but the Emergency lights will make a rapid clicking when turned on and will not function..

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Have you tried the signal stat that should be located around the fuse box?

Posted on Apr 24, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: no turn signals............

If you look under the dash on the left hand side you will see the fuse area, behind this you should see a large ( about 1 - 2 inch) black square block. These usually sell for about 10 - 15 dollars each at the local auto stores. This is a link to a picture of them. Carry this into your local parts store and put in the new one and you should be good to go.

Please let me know if I can offer further assistance! I hope you found my answer helpful - if you need clarification please just ask me!

Posted on Jan 03, 2009

  • 12 Answers

SOURCE: Turn signal won't turn off or switch directions

You need a new turn signal switch

Posted on Jan 24, 2009

keithheavili
  • 410 Answers

SOURCE: brake lights out; bulb, fuse okay

Sounds like you need to replace your brake light switch.  It is located on your brake pedal and you should be able to pick it up for around $20-$30 at your local parts store.

Posted on May 19, 2009

  • 412 Answers

SOURCE: Have hazard lights but no running or turn signals

sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay

Posted on Jun 14, 2009

jturcotte
  • 8273 Answers

SOURCE: my turn sinals don't work.

according to autozone.com, your flasher is on driver side, under dash, driver side of steering column, mounted in relay bracket. The hazard flasher is there also. If your hazards work, turn them on to help you locate both flashers, then replace the one that isn't clicking!

Posted on Oct 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

When i turn the signal lights for left or right turn the emergency flasher start flashing all four turn signal lights. the emergency flashers work ok


ck your turn signal switch wiring connector because it is more than likely has been hot and melted some connections.

Oct 18, 2014 | 2000 Kia Sportage

1 Answer

No turn signals whatsoever despite replacing the switch ?


How well does the turn signal flasher work?

Feb 21, 2014 | 1991 Ford F150

2 Answers

I have no signal lights


Do the emergency flashers work? If they do the turn signal flasher relay is probably bad.There should be 2 one for turn signals and one for emergency flashers. What you can do if emergency flashers are working is turn them on and see where the clicking is coming from.The 2 flashers are usually very close to each other.

Apr 23, 2011 | 1991 Pontiac Grand Am

1 Answer

I drive a 2000 mitsu. mirage. my turn signals just stopped working. i checked the bulbs the fuses they're good. the emergency flashers work im wondering if maybe its the turning module but i dont know...


The emergency flasher switch is also the turn signal flasher It pops out of the dash and can be replaced easy. do chaeck the fuses before going to this much troble. check all the fuses as some work backup circuits that you wouldn;t think would be important. Before replacing the flasher switch ( you may only be able to buy it from the dealer) work the switch several times and the flashers will come on cheak to see if allthe lights work thenturn the flashers off and see ( with the key on if the turn signals now work. Now if during the test with the four way flashers you see a bulb or more out you know that the turn signals wouldn't work, but the four ways will. they work on different fuses so chak the turnsignal fuse too. after cycling the switch try the turn signals again as the switch is likly to stick and sometimes cycling it will get the turn signals working again. Fooling around with the switch you may find a position that the turn signals work. if you can't get it to stay working then you'll have to change the flasher emergency switch.

Sep 30, 2010 | Mitsubishi Mirage Cars & Trucks

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
2005 Dodge Neon Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...