Question about 2003 Hyundai Santa Fe
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.
Posted on Apr 06, 2009
lift the tailgate, and you should see 2 screws on the side of the lamp assembly. remove the screws, and remove the lamp assembly by sliding it sideways away from the vehicle. you will be able to access the bulbs & sockets once the taillamp has been released.
Posted on Apr 14, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
SOURCE: Santa Fe makes jerking motions
the air conditioning changes your idle speed when the compressor cycles on and in some vehicles will cause the problem you have.
it is the design and there is nothing you can do about it
Posted on Aug 19, 2009
Look up into the bumper and see if you can access the fog light. The bulb should just twist out of the back. If not, the assembly should either pop forward or back to come out. I've heard though, that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia on
Posted on Sep 09, 2009
Tips for a great answer:
Mar 17, 2017 | Cars & Trucks
Dec 02, 2016 | 2013 Hyundai Santa Fe
Jan 26, 2016 | 2013 Hyundai Santa Fe
Feb 21, 2015 | 2013 Hyundai Santa Fe
Nov 30, 2014 | 2013 Hyundai Sonata Limited
Aug 24, 2014 | 2013 Hyundai Santa Fe
Aug 26, 2013 | 2003 Hyundai Santa Fe
Nov 20, 2012 | Hyundai Cars & Trucks
Dec 31, 2009 | 2007 Hyundai Santa Fe Limited
Nov 23, 2016 | 2003 Hyundai Santa Fe
119 people viewed this question
Usually answered in minutes!