Question about 1999 Chevrolet K1500

Open Question

Anti theft wiring diagram

Crowsfoot diagram socket broken on truck side need to know witch wires to cross with each other.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: wiring diagram

Helpful Wiring Information when hard wiring your brake control:
Run two wires to the battery:
White - Ground
Black - Power
Blue - Run to Electric Brakes at the Rear Plug
Red - Run to cold side of brake switch off of the brake pedal (using a test light to find the cold side)
Note: Always wire the red wire to the heaviest gauge wire when testing cold side of brake switch.

You can view more info here. http://store.drawtite.com/brakecontrols.html

Posted on Nov 17, 2008

Ad
  • 233 Answers

SOURCE: 1999 Chevy Tahoe Door wiring diagram

I am not sure exactly where to get your info for free, but have another solution. The drivers door holds all you need. The door panel needs to be removed and then reconnect the power door lock switch. Then just locking and unlocking the door will trigger the actuator to move, allowing you to find it and the wires connected to it. Disconnect the wires and plug in a Digital Multi-Meter into the plug on the wire end and hit the lock and the unlock buttons to find which polarity to which wire unlocks the door and to lock it would be in reverse. Then he can wire the keyless entry into the truck via these wires and can use wire-taps which will pop over the wires in the truck and allow him to add the keyless entry w/o cutting wires. :D Have fun

Posted on Jun 08, 2009

  • 3600 Answers

SOURCE: Need engine harness wiring diagram for 2001 chevy truck V8

The Best diagram you can get is at alldatadiy.com it has the sections and locations and color of wires with pictures.

Posted on Aug 20, 2009

joecoolvette
  • 5660 Answers

SOURCE: I replaced my spark plug wires on my 1996 chevy

Since you didn't state whether it is a V6 or V8, I'll give you both.

V6 -4.3Liter
Firing Order is 1-6-5-4-3-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap, faces the front of the engine.

->Drivers side, spark plug order in engine, starting from the Front going back:
1-3-5
->Passenger side, spark plug order in engine,
starting from the Front going back:
2-4-6

If it's Electronic, the distributor cap has a Left side, (Drivers side), and a Right side, (Passenger side)
Starting from the Front, going back on the Left side,
3-1-5
Starting from the Front going back on the Right side,
2-4-6

V8-5.0, 5.7, and 7.4Liter
Firing Order is 1-8-4-3-6-5-7-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap,
faces Front, towards the Drivers side.

Electronic distributor cap has two sides. Drivers, (Left), side and Passenger, (Right), side.
Starting from Front going back on Drivers side,
1-7-3-5
Starting from Front going back on Passenger side,
8-2-4-6

Spark plug order in engine, starting from Front going back, Drivers side:
1-3-5-7
Spark plug order in engine, starting from Front going back, Passenger side:
2-4-6-8

Posted on Aug 28, 2009

  • 2926 Answers

SOURCE: Need diagram for spark plug wiring for 1997 Chevy

ebe6e34.jpg
01f93b7.jpg ..............................

Posted on Jul 24, 2010

Testimonial: "Thank you for your prompt response. Saved my husband from some distress!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Switch is broken I need to cross wire in ingnition to start but need diagram of wire and colors


What make , model , year and engine size ? That doesn't work on a lot of vehicles now a days ! Anti-theft systems , programming in the control modules . Plus on some the start circuit is a input to the PCM or the BCM , an hot wiring will not work .

May 17, 2017 | Cars & Trucks

1 Answer

Need to know where the tdm is on a 1997 Cadillac deville can't get security system to shut off should I replace ecm ? Please help


It's hard to get the SECURITY light to go off when you don't know how it works ! Replacing the PCM could cause you more problems too . If a replacement PCM is being installed it must be programmed (flashed) using the latest Techline programming procedures.
Having the vehicle check for DTC ' S - diagnostic trouble codes would be the first step.
DTC P1626 Theft Deterrent Fuel Enable Signal Lost
DTC P1630 Theft Deterrent Learn Mode Active
DTC P1631 Theft Deterrent Start Enable Signal Not Correct
DTC P1632 Theft Deterrent Fuel Disable Signal Received

This anti-theft system does not use a TDM - theft deterrent module . The instrument cluster is the controlling module . Look at a wiring diagram here
http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model engine . Then under systems click on body & accessories , then in subsystem click on security / anti-theft . Click the search button , then on the blue link .You mite be able to do a by-pass if the contacts inside the key lock cylinder is the problem . You can check it with ohm meter . The key has a resistor pellet on the side , you can check the value with ohm meter , find the two wires under the dash at the steering column . Two white wires inside a yellow or orange sheathing . There are videos on youtube !

Apr 13, 2017 | Cadillac Cars & Trucks

1 Answer

Need a computer wiring diagram for a 1997 saturn sc2 . Building a race car out of it and i cut some wires i shouldn't have.


these diagrams are broken down into subsystems. engine performance, lighting, hvac, anti theft, power windows, etc. if you can let me know what exactly is not working or if you can give me some wire colors or some connector info I might be able to set you up with what you need.

Aug 15, 2015 | Saturn Cars & Trucks

1 Answer

My imoboliser is broken. so how do i start car if imoboliser is broken


General anti-theft devices are connected with the original car ignition switch wiring harness on the firing line first connected to the anti-theft device, drawing a line of fire from the anti-theft device into the ignition switch. You can the combination switch the first guard removed, and then find the ignition switch, disconnect the two lines you will be connected with the anti-theft device, FireWire directly to the original vehicle wiring harness plug connected to the ignition switch on, you can normally start.

Nov 09, 2012 | Cars & Trucks

1 Answer

How to bypass anti theft ignition on a 1998 pontiac sunfire


I must have a broken or bent wire in the shifting area on 1998 pontic sunfire shifter area the wires next to the . shifter are visual I don't won't to go to the libiary for a book witch I'm sure is faster but it's cold vickie

Jul 15, 2012 | 1998 Pontiac Sunfire

2 Answers

I have a 1995 ford f50 that will not start with the key. Replace ignition switch, clutch interlock safety switch, starter relay on the passenger fender. I can manually jump start by crossing the pole s at...


Check the small wire going to the starter relay. It should have 12V when the ignition is in the start position. If it doesn't, you either have a bad igntion switch or a wiring problem from the switch to the relay. If you don't have a volt meter, you can use a 12V test light. Let me know if you need more help.

Aug 25, 2011 | 1995 Ford F150 Styleside Regular Cab

1 Answer

I'm trying to replace the spark plugs on a 2000 olds intrigue 3.5L. Is there a place I can find a diagram of the plugs' location? Can I do it myself or are the plugs hard to get to?


You should see 3 plug wires on the front side of the engine,remove them twist and pull straight out,to remove the wires.do not get them crossed,but place them where you know they will stay ,since they need to go back to the same spot,or plug.
The back side may be more difficult.If you cant reach them from the top you may need to go from the lower side under the car!! hopefully you can see the wires and remove them and the plugs from the top. A short length of 3/16 rubber vacumn line is verry useful to reinstall the plugs back into the plug holes,since the plug socket may be awkward,and you dont want to start them cross threaded,esp if the heads are aluminum.And if they are they need to be coated with anti seizeing compound! A gray looking grease!
Make sure the plugs have the right gap! Dont drop them on the dirty ground or hard concrete,if you do clean them and regap! Take your time,if you can and you may save some $$$$ good luck!

Aug 30, 2010 | Oldsmobile Intrigue Cars & Trucks

1 Answer

1997 Gmc suburban 1500 How to bypass the anti theft if your column wiring is tore up or how to by can get a wiring diagram of key switch and where the passive wires connect


the best way to fix it is find a good savlge yard , you will need complete steering column with switchs wiring and anti theft control box. they need to be match set all from the same car. shop around make shure they understand your problem , all the parts will cost about 250.00 350.00$ make shure to get money back warr.if not keep shoping. make shure the person understands and knows the system if not it will not work. I have repaired over 20 of this type and the first one sent me back to the school of hardknoxs.

Aug 24, 2010 | GMC G1500 Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet K1500 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...