Question about 2007 Hyundai Accent GLS

2 Answers

Rubbing noise in steering column

Very low speed eg, coming to s top to then reverse of just setting off, I hear a rubbing noise, which seems to be coming from where the steering wheel is attached to the column

Posted by on

  • 3 more comments 
  • Joyce T
    Joyce T Apr 25, 2014

    Had the vehicle into Hyundai. The seem to think it is the brake booster. I'm having it replaced. I'll let ya know if it solves the issue. When I put the brake on & turning the wheel, it will make the rubbing / chirping noise. I hope it works! Many seem to have this issue, but no real resolutions.

  • Joyce T
    Joyce T Apr 25, 2014

    Thanks for your help!

  • Joyce T
    Joyce T May 28, 2014

    Brake booster did not solve issue. Back to Hyundai as the "fluttering/chirping/rubbing noise continues. Why would I hear a sound when I brake the vehicle to between 20-10 km. hour? I sometimes here it when I turn the wheel to the right at slower speeds as well. The sound seems to originate under the dash on the drivers side and can not be heard under the hood? Power steering? ABS?

  • steve May 28, 2014

    i'd make sure they check the drivers side wheel mounting ,brake assembly ans suspension especially the top of the spring mount good luck let me know how it turns out

  • Joyce T
    Joyce T Sep 07, 2014

    Definitely was not the brake booster! lol Hyundai Woodstock seems to guess at solutions. How did they diagnose? They said, well it seems to make sense since it is the only thing under the area where the sound SEEMED to be coming from! Ouch. Not going back there for any repair work!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Omg worn out rotors will not make your steering wheel make rubbing noises. Some ppl should just read and not write. There is a rubber boot that your steering shaft goes through on the fire wall .sometimes it dries out .if you lube it with silicone paste .not petroleum based.it might help.do it from inside the car.under dash .or it might be clock spring .or rotary coupler in steering wheel. You might just try to lube .the hen if it don't work take to dealer.if it don't help.

Posted on Sep 07, 2014

  • steve Sep 07, 2014

    OMG you should try taking a basic mechanics coarse before passing judgement on other people's opinion's , just good manners not to criticise , have your own opinion by all means but you don't dis others

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 3,679 Answers

Try a little spray of wd 40 as could just be a dry bearing at top of column dont remove the steering wheel just spray behind wheel as you turn it

Posted on Apr 23, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

232K7
  • 26 Answers

SOURCE: hyundai tucson makes sqeeking noise inthe steering

are you able to duplicate the noise standing still?
if so it is most likely the clockspring contacts that are rubbing together.

Posted on Apr 14, 2009

  • 1374 Answers

SOURCE: Whining noise at low speed

If the noise happens when car is in park and you rev it to about 1500rpm's then its thebearing in the oil pump of the torque converter.It should make noise all the time even in park ideling. You may need a rebuild transmission. Have the vehicle checked out at a transmission repair shop

Posted on May 05, 2010

  • 40 Answers

SOURCE: Noise coming from front of car

It sounds exactly like a wheel bearing problem.The right side its seems would be the problem. When you turn right it puts more pressure on the bad bearing making it louder. I would suggest replacing both. If on is gone the other one isn't far off. Hope this helps

Posted on Mar 05, 2009

  • 186 Answers

SOURCE: play in the steering wheel column after position adjustment

When they did the alignment it's possible that they used a tool that locks the steering wheel straight while it's on the alignment rack.If they put too much pressure on the wheel when they used the steering wheel seat lock tool it may have stressed you tilt lock mech causing it not to lock where you want it.Hope this helps

Posted on May 16, 2009

  • 750 Answers

SOURCE: steering wheel makes "rubbing" sound when I turn it

check the drive belt tension and condition,system may have air in it, check fluid level check line for signs of leaking, also there may be some internal wear in pump

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Buick LeSabre has clicking noise in steering column when reversing.


Could it be coming from the dash??? That car might be old enough to have a speedo cable. Another thought, I know some Caddys that had an automatic park brake release. You had to put it in gear for the Park brake to release. Hope that helps.

Feb 25, 2016 | 1994 Buick LeSabre

1 Answer

Oldsmobile aurora 1998 steering noise


Sounds like CV joints(Front-wheel drive) need to be inspected / replaced..

May 09, 2017 | 1998 Oldsmobile Aurora

1 Answer

Oldsmobile aurora 1998 steering noise


Your going to order a part you know nothing about &
install in your driveway?

Without the car to test we should be able to guess ?

Thinking & actually having the car properly tested !!

Mar 13, 2013 | Oldsmobile Cars & Trucks

1 Answer

Driving at highway speeds noise like rubbing coming from front end and when I turn corners to the right the sound disappears. At low speed there seems to be a lot more road noise coming from front end than...


Flush the Power Steering Fluid

Should be done with the trans every
30,000 miles

May not be the issue ,but you have to
do the following anyway :

Power Steering Fluid --30,000
Trans Fluid --- 30,000
Brake Fluid --- every 2 years
Clean MAF sensor --every year
Fuel Filter,Air Filter,Cabin Filter --every 3 years
Spark Plugs -every 3 years ,not over 60,000

Jun 12, 2011 | 2008 Ford Focus SE Sedan

1 Answer

I have a 94 ford mustang. I hear a bad "rubbing noise" in the front end and also a whine from the power steering pump. The steering seems to be ok, but people are telling me i need a new power steering...


It sounds like you need to replace it or you can get your power steering pump flushed out and give that a try. As for the rubbing noise I need more info. What are you doing to make it do that noise? Do you know where in the front?

Sep 22, 2010 | Ford Mustang Cars & Trucks

2 Answers

Loud popping noise when turning.Seems to be coming from the drivers side front wheel


this could be a bad inner axle joint check to see if the axle boot on the left side is torn or missing also check the wheel bearings and tie rod ends by jacking up the front of the vehicle one corner at a time and grab the tire at the 9 o'clock and 3 o'clock position and wiggle it back and forth looking for excessive movement in the tie rod ends then reverse your hands to the top and bottom of the tire and try moving it from top to bottom checking for excessive wheel bearing movement it shouldn't move in or out at the top or bottom

Jan 01, 2010 | 2000 GMC Yukon XL

4 Answers

2003 Saturn VUE Steering Column Noise and Resistance


i am a saturn tech and ive never heard of this concern,the columns do go bad but they just set a ses light and cut out power,the column could be bad,it could also be the intermediate shaft u joint binding,,,i rec take to dealer, could be serious

Oct 03, 2009 | 2003 Saturn VUE

1 Answer

Noise coming from the front end of my 2003 dodge durango


You didn't specify if your vehicle is 2- or 4-wheel drive. If 4 wheel, you may have a failing contstant velocity joint which, when having developed worn spots in the cage can cause the noise you describe.
Typically, turning the wheel back and forth can cause the noise to become less or more loud and often the combination of a specific speed and driving a certain curve radius can cause the noise to nearly disappear or become more pronounced.

Jul 12, 2009 | 2003 Dodge Durango

3 Answers

A low growling noise when turning left only on '04 Silverado


Intermediate shaft is the most likely cause for this and your right there have been issues.

Jun 19, 2009 | 2004 Chevrolet Silverado

1 Answer

2000 outback AT reverse gear grind/grunt


i would inspect the trans mount it may be bent,reverse is a big strain on the drivetrain and if it's not aligned properly this could be your problem,look for the post on the cross member that has arubber bushing on the bottom,if it's not centered its hitting the mount as for the steering column noise i'm thinking this noise maybe the clock spring this is part of the air bag system,the spring can be weak and in turn rubs on casing causing noise, believe it or not the engine noise your describing is a normal operating noise!

Jun 09, 2009 | 1997 Subaru Outback

Not finding what you are looking for?
2007 Hyundai Accent GLS Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...