Look at the instrument cluster for any other warning lights, check all your gauges as it is asking you to. there is a problem occurring somewhere elsewhere on the cluster. could be a warning light, or possible oil pressure gauge, temp gauge, fuel gauge ect
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well the check gauge light is telling you to check your gauges, because of the low oil pressure. It could be a sending unit problem, or the oil pressure really could be dangerously low. Should be at least 25psi at idle.
First what had abnormal reading ? it is not the gage needing service
Fix the problem gage show (low gas,hot,voltage etc...low ,flasher on to long , coolant ,low brake fluid ...)parking brake on! Tcc , ABS,SRS light, check engine ,It tell you to see you gage check and fix the problem an check gage will come out
Which lights? the night lights or the symbol lights. if the symbol lights are the lights that are on, you need to tell me which ones. you said all lights but if it is the symbol lights then you are telling me the battery light ,oil light ,temp light, abs light, low coolant,washer fluid,check engine,brake and so on, let me know what is on.
Have either autozone or auto discount...depending on your location, they will check it for free an tell you what the problem is.. they can reset it..however it will continue to come on until the problem is resovled
The first one is telling you that there is a fault detected in your ABS, automatic braking system. This is the system which keeps your wheels from locking up during hard braking. Might want to get someone to check on it.
CHECK GAGES light (1) indicates a potential engine failure(low oil pressure, low coolant, coolant overheating) has occurred. · Check gages and shut down engine. Gages should read as follows: Oil pressure 5 to 10 psi (34 to 69 kPa) at idle; Water Temp gage below 230 degrees (110 C).
· Check engine oil level (Para 2-11) if OIL PRESS gage indicates low reading. Check coolant level (Para 2-11) if Water Temp gage indicates high reading. Notify Unit Maintenance if levels are low.
If CHECK ENGINE light (2) is on, check engine oil pressure gage (3) and water temperature gage (4). If both indicate normal, proceed with mission and then notify Unit Maintenance. If either one does not indicate normal, stop engine immediately and notify Unit Maintenance
A "check gage light" typically indicates a faulty reading on one of the gages located on your instrument cluster. After starting your vehicle, observe your instrument cluster if one of the indicator needles on the instrument cluster remains all the way to the left or "pegs" out all the way to the right, it may be the cause of your fault. The exception is the coolant temperature gage it will take 10 to 15 minutes after which the needle should rise to a normal position. Correcting the "faulty gage light" will depend on which gage is malfunctioning. Once you have figured out which gage is causing the check gage light to illuminate, then we can proceed to correcting the problem causing it.