Question about 2000 Honda Accord
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: P1457 - Honda Civic 2005 LX
this car come with tree diferent engines the answer i'm going to give you is for a 1.7 engine sohc that codes means you have a leak on the evaporative system this system monitor the vapors from fuel tank this code some time might appear for filling the fuel tank with car runing i recomend you to clear code and make sure the fuel cap is not loose because there is a fuel pressure sensor in the tank and if the sensor don't read the right pressure then it will set the code
Posted on Jun 01, 2008
YOU HAVE A TORQUE CONVERTER PROBLEM. TORQUE CONVERTER CONTROL CIRCUIT MALFUNCTION CODES CAN COME FROM ELECTRICLE TO INTERNAL MALFUNCTION. IF YOU START EXPERIENCING A HARD SHIFT OR FREE SPIN TO HARD SHIFT DON'T BE SURPRISED. TRY CHANGING FLUID. THIS MAY HELP. HONDA WOULD HAVE REPLACED TRANS IF UNDER 105 k FOR FREE. IF YOU HAVE TO REPLACE TRANS. BUY ONE FROM HONDA, 3 YR WARRANTY AND AS CHEAP AS A REBUILT TRANS. HAVE A QUALIFIED PERSON INSTALL, YOU WILL SAVE ABOUT $500 DOING IT THIS WAY. GOOD LUCK
Posted on Mar 25, 2009
P1362 = TDC (top dead center) sensor (1) no pulse.
Reset your car's power control module (PCM or ECU) by turning off the key and pulling the clock/backup fuse for 10 seconds then reset. Start the engine and see if the code returns. If not, it was an intermittant fault and the system is okay--but check for dirty or loose wire connector at TDC1/TDC2 sensor. If the code returns, check wiring to the sensor---if the wiring checks out, replace the sensor.
Posted on Apr 05, 2009
Hi,welcome to fix ya.
p0171 is for a lean fuel condition .A variety of things can cause this code the most common one is a bad o2 sensor but a plugged injector,fuel filter or dirty egr system can cause this as well.
Posted on Apr 05, 2009
Tips for a great answer:
Sep 12, 2017 | Cars & Trucks
Nov 18, 2016 | Cars & Trucks
Dec 02, 2015 | 2005 Toyota Corolla
Jul 17, 2014 | Cars & Trucks
Oct 05, 2011 | 2000 Chevrolet Venture
Jan 07, 2017 | 2000 Honda Accord
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: