Question about 2004 Nissan Sentra

Open Question

Torque speces I have a 2004 nissan sentra engine model qg18de i took the engie apart and putting it together again what is the torque specs. for the connecting rod bearing cap

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 701 Answers

SOURCE: piston rod bearings

Hello capybluebloo: The torque specs are as follows. Step one tighten to 10-12 ft.lbs. Step two is to tighten an additional 60-65 degrease. I checked two different shop programs and they both say the same. I hope you have access to a degree meter as the degree is very important. Please leave a rating as to quality of your reply as it does help. Should you need more help just ask. Thank You for using FixYa. Roger

Posted on Apr 16, 2009

BCAS1298
  • 3092 Answers

SOURCE: what are the torque specs

Rod cap nut's

Step 1 -10-12 Ft.LBS
Step 2 - 60-65 Additional Degrees


Head Bolt's

Step 1 - 22 Ft.LBS
Step 2 - 59 Ft.LBS
Step 3 - Loosen all bolt's
Step 4 - 22 Ft.LBS
Step 5 - 86-91 Additional Degrees

bcas1298_8.gif

Posted on Dec 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for QR25 engine?


Nissan QR20 MOTOR
QR25 NISSAN ALTIMA SENTRA
i cant find free engine repair manual or torques specs online


26337150-qjqnzydliaqyqu4sjtgj0otb-1-0.jpg

Nov 02, 2016 | Cars & Trucks

1 Answer

How to remove the intake manifold on a 04 mountaineer


With a manual. Taking it apart isn't the hard part. Just start removing everything. Putting it back together. You need sequences and torque specs. Do it wrong and you will do it again.

Jun 13, 2015 | 2004 Mercury Mountaineer

1 Answer

Spark plug gap setting for NKG FR4 2000 nissan sentra 1.8


Make: NISSAN
Model: SENTRA
Year: 2000
Engine: L4 - 1.8L - FI - QG18DE - GAS

Part Number: REC10YC4
GAP : .044"

Hope helps. Just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment. Have a nice weekend and thanks for using FixYa.

Jose.

Oct 17, 2011 | 2000 Nissan Sentra

1 Answer

How can i remove and install a blown head gasket the right way, from a nissan sentra 1.8 (QG18DE)? please help.


You should get a service (shop) manual which describes this procedure. (You may be able to borrow one from your local public library, but I think they are worth buying).
If this is an overhead cam (cam-in-head) engine, you will need to turn the engine until the timing marks on the cam and crank line up, so that you can put it back together correctly.
You will also need the head bolt tightening (torque) sequence, the bolts have to be tightened in a certain order to the correct torque value.
You might want to replace the water pump at the same time, as you will be taking off everything (and more) that you would have to take off to replace it, and unless you have done that recently, it is about due anyway.
This is MAJOR engine work, unless you have done a fair bit of repairs before, you might not want to attempt this yourself.

Sep 05, 2010 | Nissan Sentra Cars & Trucks

1 Answer

AIT diagram for QG18DE motor.


what could cause stuttering problems at 80 kph



Aug 13, 2010 | 2004 Nissan Sentra

2 Answers

I have a 2003 Nissan Sentra SE-R and the engine keeps sputtering while i am driving and the diagnostic pulled the P0335 code indicating that my CKP is malfunctioning but i just replaced it and it is doing...


Note - not a solution..just adding my woes!
I drive a 2003 Nissan Sentra SE-R Spec V.
My car suddenly stalled 1 day and the engine wouldn\'t turn over. Brought it to my mechanic and had the Camshaft position sensor replaced by my mechanic. The car ran fine for about 2 weeks and then the light was back on with the initial symptoms.

Took the car into the dealership and they diagnosed it again as P0335. Said that the mechanic hadn\'t installed the sensor correctly. Charged me a bunch of money to replace the thing and not too long ago the check engine light is on. The Revs bounce around everywhere. Checked the code again and it\'s P0335 yet again! Am in talks with the dealership to get to the bottom of this...

Apr 19, 2010 | 2003 Nissan Sentra

1 Answer

What is the cylinder head torque spec for a 2005 nissan sentra 1.8 liter engine


  1. For 1.8L engines, tighten the bolts in sequence, as follows:
    1. Step 1: Bolts 1-10 to 22 ft. lbs. (29 Nm).
    2. Step 2: Bolts 1-10 to 43 ft. lbs. (59 Nm).
    3. Step 3: Loosen bolts 1-10 completely.
    4. Step 4: Bolts 1-10 to 22 ft. lbs. (29 Nm).
    5. Step 5: Bolts 1-10 plus 50-55 degrees.
    6. Step 5: Bolts 11-14 to 74 inch lbs. (8 Nm).

      0900c152801afb79.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Cylinder head torque sequence-1.8L engine


      0900c152801afad8.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Tighten the valve cover bolts in sequence-1.6L and 1.8L engines

Nov 13, 2009 | 2005 Nissan Sentra

2 Answers

I need the Torque Specs for a Nissan Q-R 2.5 Engine?


Nissan QR 2.5 engine produces a torque of 180 ft·lbf (244 N·m) of torque at 4000 rpm .

Oct 11, 2009 | 2003 Nissan Sentra

2 Answers

How difficult is it to change the crankshaft sensor on a 2004 Nissan Sentra Se-R Spec V. I need to know how to go about changing the crankshaft sensor on my car.


Hello erosgirl32....according to the service manual for the 1.8 litre sentra, it is located under the starter at the rear of the engine.
This is not an easy job for the do-it-your-selfer.
Good luck...i hope this helps, please rate me a fixya.

Jul 23, 2009 | 2004 Nissan Sentra

Not finding what you are looking for?
2004 Nissan Sentra Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...