Question about 2006 Honda Pilot

1 Answer

How to remove oil pan

STEP HOW TO REMOVED OIL PAN FOR 2006, HONDA PILOT

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Honda Expert
  • 554 Answers

Remove the exhaust pipe "A" first. don't forget to put a lube, like WD40 on all the exhaust studs, nuts and bolts before loosening them. Drain the oil and unbolt the oil pan, (18?) 10 mm bolts. The pan will need to be pried loose.

Posted on Jun 02, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 740 Answers

SOURCE: removed and replace the oil pan gasket on 96 Honda accord

Yes it is possible if the oil pan is making contact with the fly wheel or the dust shield that's between the transmission and the oil pan. Take off shield and check with engine running make sure that vehicle is on a lift that's locked or on secure jack stands NOT with a jack alone. Good Luck

Posted on Dec 16, 2008

picatudo
  • 239 Answers

SOURCE: 1999 OIL PAN GASKET

you have to remove exhaust

Posted on Jan 05, 2009

landsend
  • 1066 Answers

SOURCE: Replace Oil Pan on 2000 Honda Accord

public library...Chilton or Haynes auto repair manuals or collisionrepairadvice.com

Posted on Apr 03, 2009

  • 4 Answers

SOURCE: 98 honda accord oil pan gasket

Replace oil pan gasket, make sure not coming from behind timing belt cover first.

Posted on Apr 15, 2009

  • 490 Answers

SOURCE: i have a 1989 honda accord dx with a oil pan

they don't use gaskets on oil sumps its sealant glue and yes u will have to reapply it when you put the sump back on, and what do u mean by main seal? do you mean the head gasket?

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Howtoreplaceoilpangasket leaking oil?


Oil pan can be replaced in the truck .the oil pick up tube has to be removed .then the pan can be removed to clean serface

Jun 13, 2014 | 2006 Ford F-250 Super Duty

1 Answer

2006 HONDA PILOT OIL PAN REMOVAL


IS HARD TO DO THE JOB ON THE DRIVEWAY BUT I WILL GIVE YOU SOME DIRECTIONS.
DISCONNECT THE BATTERY
RISE THE VEHICLE AND DRAIN THE OIL
REMOVE THE EXHAUST PIPE FROM CAT.CONVERTER.
REMOVE THE SMALL CAP FROM TRANSMISSION LOWER SIDE COVERING THE FLEX PLATE.
REMOVE THE BOLTS FROM THE OIL PAN .
CLEAN THE GASKET FROM PAN AND ENGINE.
INSPECT THE OIL STRAINER AND CLEAN.
REPLACE THE GASKET AND INSTALL 4 BOLT TO FIX TO THE PAN IN POSITION.
INSTALL THE PAN AND DRIVE HALF WAY THE 4 BOLT.
INSTALL THE REST OF YOUR BOLTS AND TIGHT SLOWLY .
REPEAT IN 3 STEPS TIL TIGHT.
IF YOU SEE THE GASKET START TO BLOW OUT OF THE PAN, STOP. IF YOU OVER TIGHT WILL BRAKE THE GASKET AND WILL LEAK.
GOOD LUCK

Apr 23, 2014 | 2006 Honda Pilot

1 Answer

Removing oil pan


HOW TO REMOVED AND REPLACED OIL, PAN. FOR 2006 HONDA PILOT.

Jan 02, 2014 | 2000 Ford Explorer

1 Answer

Replacement of the oil pan on a cadillac 2006 DTS


Big job.

gmlogoflat.gif Service Information
bhome.gifbpublication.gifbnumsrchbutton.gifbnews.gifymkbutton.giffeedback.gifbhelp.gif
2006 Cadillac DTS ' DTS VIN K Service Manual ' Document ID: 636855 Oil Pan Removal

    1527739.gif
    tif.gif
  1. Rotate the engine so that the oil pan is facing up.
  2. Remove the oil pan drain plug.

  3. 1373472.gif
    tif.gif
  4. Remove the oil pan bolts.

  5. 1373475.gif
    tif.gif
  6. Remove the oil pan from the lower crankcase oil distribution manifold plate.

  7. 1373484.gif
    tif.gif
  8. Remove and discard the oil pan gasket.

  9. 204585.gif
    tif.gif
  10. Remove the oil level sensor (1).

Jul 29, 2011 | 2006 Cadillac DTS

1 Answer

How to do a transmission fluid/filter change on a gmc 1500 2wd v8 350 step by step


Raise the vehicle. Refer to Vehicle Lifting. Place a drain pan under the transmission oil pan. Remove the oil pan drain plug. Remove the oil pan bolts. Remove the oil pan. Remove the gasket. Remove the magnet. Remove the oil filter. Remove the filter neck seal. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed. Clean the transmission case and the oil pan gasket surfaces with solvent. Install the filter neck seal. Install the oil filter. Install the oil pan gasket to the pan. Install the magnet into the bottom of the pan. Notice: Refer to Fastener Notice in Service Precautions. Install the oil pan to the transmission with seventeen bolts. Tighten the oil pan bolts to 11 Nm (97 inch lbs.) . Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug. Install the oil pan drain plug. Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.) . Install Dextron Automatic Transmission Fluid. Lower the vehicle.

Jul 04, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

How to replace an oil pan on 1991 honda accord


  • Get under the car and locate the oil pan near the front of the vehicle . Put a drain pan within easy reach. Use a socket wrench to remove the nut that holds the oil pan to the car. Hold the pan with your other hand so it won't drop when the nut is removed.
  • Slide the drain pan quickly under the oil pan to catch the old oil. Drain as much as possible.
  • Remove the old oil pan gasket very carefully with a thin paint scraper, and then wipe the surface with engine cleaner or solvent.
  • Rub a bit of oil on the sealing surface to promote adhesion, and attach the new gasket securely. Reattach the oil pan to the car with the bolt.
  • Pour fresh oil into the crankcase. Honda Accord cars will require between 5 and 6 qt., so fill it until the crankcase looks full, and then check it with the dipstick to be sure, adding more if necessary. Back the car off the ramps.
  • Put the old oil in a used milk carton and attach the lid securely. Take the oil to a hazardous materials disposal facility, or to a garage.
  • Aug 23, 2010 | 1991 Honda Accord

    1 Answer

    What is involved with replacing the oil pan on 1998 GMC Sierra?


  • Step 1 Raise the truck using the proper equipment. Use a ramp or a jack and jack stands to support the vehicle securely by following all directions for use provided by this equipment's manufacturer.
  • Step 2 Drain all oil from the Silverado by placing an oil drip pan under the vehicle's engine block, directly under the oil drain plug. The drain plug is located on the oil pan, between the vehicle's tires underneath the vehicle. Use a wrench to loosen and remove the plug allowing the oil to drain into the pain below.
  • Step 3 Notice the various items attached to the oil pan or in the way of the oil pan dropping. For the oil pan to drop, remove the negative battery cable, front differential (only for four-wheel drive vehicles) and the under body shield by using a wrench or socket set.
  • Step 4 Remove the oil pan shield by loosening the four bolts holding it in place along the edges of the shield. Then, remove the cross brace, oil filter, the transmission to oil pan bolts and the oil level sensor.
  • Step 5 Follow the removal of those pieces by removing the bolts from the two front wiring harness, the engine wiring harness retainer, engine oil cooler pipe to oil bolts and the transmission oil cooler pipe retainer using a wrench. Located the closeout covers and bolts located on each side of the engine and remove them.
  • Step 6 Disconnect each of the oil pan bolts using a wrench that will allow the oil pan to drop. The oil pan gasket will also fall off and replacement should occur before reinstalling the oil pan.


  • Read more: How to Drop the Oil Pan in a Chevy Silverado | eHow.com http://www.ehow.com/how_4508109_drop-oil-pan-chevy-silverado.html#ixzz0wi82Ul2u

    Aug 15, 2010 | GMC Sierra 1500 Cars & Trucks

    2 Answers

    Can i drop the oil pan and or change the oil pump with out pulling the engine?


    Bearings are located at each "big end" of every connecting rod (the rod that connects each piston to the crankshaft and at each crank support (part of the engine block) To measure wear on a bearing you need something called "plastigage" which is placed betweenthe bearing surface and the crank, the cap re-torqued then removed. You then measure the spread of the gauge material with a micrometer. If you remove any bearing and see brass backing instead of bearing material, you don't need to measure it...It is gone.You need to check all the bearings in this manner. If any Main bearings are worn, the engine needs to be removed as that is the ONLY correct way to replace them without having another immediate failure.
    I'm not saying this to be insulting, but if you need to ask where the bearings are, it is likely you should not be doing this work. Though it appears to be a "take out, put in" operation, it takes experience and skill not only to do the job correctly but to recognize things inside that can bite you in the **** if they are not taken care of.
    One other item....If you don't understand this answer do not rate it.
    I only am a beginner (40 years in repair, many spent building 7,000 hp race engines) so, I'm not very sure about the answer (if you believe that, monkeys will fly tomorrow!!!) We do this free and really don't need a poor rating for a perfectly good answer!!!
    Good luck!

    Mar 15, 2010 | 1991 Ford F150

    3 Answers

    The car is leaking oil and the mechanic said it was because there is a whole in the oil pan and it will cost 1800 to fix. can i buy another oil pan and put it on myself?


    OIL PAN
    REMOVAL
    Drain engine oil.
    Remove front engine mount bracket.
    Remove power-train bending strut.
    Remove structural collar from oil pan to trans-axle Structural Collar - Removal and Installation
    Remove trans-axle lower dust cover.
    If equipped with air conditioning, remove oil filter and adapter.
    Remove oil pan.
    Clean oil pan and all gasket surfaces.
    INSTALLATION
    Apply Mopar® Silicone Rubber Adhesive Sealant or equivalent at the oil pump to engine block parting line Oil Pan Sealing
    Install a new oil pan gasket to pan.
    Install pan and tighten screws to 12 N·m (105 in. lbs.)
    Install oil filter and adapter.
    Install trans-axle lower dust cover.
    Install power-train bending strut.
    Install front engine mount and bracket
    CAUTION: The torque procedure for the structural collar must be followed, as damage to oil pan or collar could occur.

    Install the structural collar Structural Collar - Removal and Installation using the following 3 step torque sequence:
    Step 1: Install the collar to oil pan bolts and tighten to 3 N·m (30 in. lbs.)
    Step 2: Install collar to trans-axle bolts and tighten to 108 N·m (80 ft. lbs.)
    Step 3: Final torque the collar to oil pan bolts to 54 N·m (40 ft. lbs.)
    Fill engine crankcase with proper oil to correct level.

    Auto Zone carries the Oil pan you need for around $75.00 and they will have the step by step instructions for you to replace the oil pan. will take just over 2 hours for the average person. Good luck and keep me posted.

    Nov 30, 2009 | 2002 Dodge Neon

    Not finding what you are looking for?
    2006 Honda Pilot Logo

    Related Topics:

    82 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76070 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...