Question about 1994 Ford Econoline

Open Question

Serpentine belt keeps popping off - 1994 Ford Econoline

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tneubauer
  • 437 Answers

SOURCE: serpentine belt keeps falling off in rain or snow

Check pulleys for being out of line. Chances are high that it is the tensioner pulley. Take the belt off and check for play in all of the pulleys. If the pulley rocks on its shaft the bearing is bad.

Posted on Jan 14, 2010

  • 514 Answers

SOURCE: why is the serpentine

ONE OF THE PULLEYS TURNED BY THE BELT IS BAD, MAYBE WATER PUMP, STEERING PUMP PULLEY, ALTERNATOR ETC.

Posted on Sep 12, 2010

cansmo
  • 2431 Answers

SOURCE: Serpentine belt keeps popping/slipping off

The power steering pump pulley must be flushed with the power steering pump shaft,Or else you will have noise or slips right off.12_11_2012_4_28_42_am.gif

Posted on Dec 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 Chevy impala serpentine belt diagram belt keeps popping off


indicates an pulley out of alignment or a power steering pump failing

Apr 27, 2017 | Cars & Trucks

1 Answer

I have a 2004 saturn vue I changed the idol pulley because it was making that noise then changed the serpentine belt but the serpentine belt keeps on popping can u tell me why?


Belt jumping the pulley ribs?

Check for worn out crankshaft damper pulley

The big one on the bottom

Only reason a belt moves, is an alignment issue
Something wore or changed since the vehicle was made

If you changed an idler pulley because of a bad bearing & noise,
that may have been one problem

Any snapping or jumping, is loss of spring tension in the tensioner
pulley assy. Those are the ones that wear & I thought you were referring to

May 15, 2014 | Cars & Trucks

1 Answer

I changed my idol pulley then the serpentine belt but serpentine belt keep popping


most likely u don't have it on the right way. most cars have a drawing under the hood that show the right way to put it on. are you sure that you have the right belt?

May 15, 2014 | Cars & Trucks

1 Answer

Surpentine belt keeps popping off


It is time to replace the belt tensioner.

Jan 11, 2014 | 2006 Ford Fusion 2.3

1 Answer

Serpentine belt keeps popping/slipping off


The power steering pump pulley must be flushed with the power steering pump shaft,Or else you will have noise or slips right off.12_11_2012_4_28_42_am.gif

Dec 11, 2012 | 1997 Ford Windstar

1 Answer

The serpentine belt keeps popping off whenever I drive through standing water.


Check the tensioner and make sure its not jamming up and moves good, remove the belt and check the pulleys to make sure they are all tight and not loose.

Dec 24, 2010 | 1991 Dodge Dynasty

1 Answer

Why is the serpentine belt keep popping i have replace the belt and the tension belt.


ONE OF THE PULLEYS TURNED BY THE BELT IS BAD, MAYBE WATER PUMP, STEERING PUMP PULLEY, ALTERNATOR ETC.

Sep 12, 2010 | Ford Escort Cars & Trucks

1 Answer

Change a serpentine belt on a 1996 chevy cavalier


Diagram should be under the hood
The auto tensioneris down low and dificult to get to.
If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
hook up the serpentine belt tool and then mount the new belt

Jan 17, 2010 | 1996 Chevrolet Cavalier

3 Answers

Serpentine belt keeps falling off in rain or snow


make sure you have the right belt first off. if you do make sure its tight. you can probably tighten it with the alternator or the idler pulley

Jan 14, 2010 | 2002 Ford Escort

2 Answers

Serpentine belt keeps popping off


Check alignment of the belt and check the condition of the belt because once it comes off it will continue to come off because the strands in the belt are broken.

Jan 09, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
1994 Ford Econoline Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...