Question about 1999 Chevrolet 3500

1 Answer

My 1999 ck 3500 chevy truck signal and hazzard lights stopped working and the fuses dont seam bad

Posted by on

  • itsmeetoni Jun 20, 2009

    did i mention its a chevy dump

  • itsmeetoni Jun 20, 2009

    were would i find this relay

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 160 Answers

There is a make or break circuit between the fuse box and the computer that may have sprung. If you find the relay, there is a small small hole in it. You need a toothpick, put the toothpick in the hole and there is sort of a button in there. You will hear it pop like a spring going into place and then the indicators should work.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 GMC 3500 CHEVY VAN WHERE TO FINE THE FLASHER


In the instrument panel relay center,below the center of the instrument panel

Aug 12, 2017 | GMC Cars & Trucks

2 Answers

I have a 2000 chevy 2500 and the tail lights, tag lights and brake lights have stopped working, I checked the bulbs and they are good, fuses are good. Have not replaced the brake relay under the hood. Do I...


check for power at the wires going intop the tail lights, real common that the circuit board is bad, but unlikely both at the same time. The tag, tail lights and brakes are 2 different systems. Do the turn signals work normally? if so the wiring from the turn signal switch to the brake lights is GOOD. the stop light switch had\s a ORANGE wire that should have 12V if not ck STOP LPS fuse, when brake pedal is depressed, the WHITE wire is 12V (at the stop light switch) if that is OK, the turn signal switch COULD be bad. The wiring harness plug is near the back left under the tailgate, see if that is disconnected?

Aug 04, 2011 | 1999 Chevrolet K2500

1 Answer

I HAVE A 2002 JEEP WRANGLER SPORT. THE HAZZARD LIGHTS DONT WORK


I think there are 2 fuses for those switches. Fuse #11 & #39

Hope that works for you

Feb 22, 2010 | 2002 Jeep Wrangler

1 Answer

2000 Chevy CK, have hazard lights, turn signals,


test your brake switch located on the brake fulcrum. you can unhook the wires and usea paper clip to connect the two wires together if the brake lights come on then replace the switch, if it does not come on and the bulbs are ok then replace turnsignal switch.

Jul 18, 2009 | 1999 Chevrolet 3500

1 Answer

My chevy 1999 ck 3500 brake lights will not work i replaced all fuses and they still will not work


i owned an 83 chevy found wires along frame had pinhole in insulation which allowed water to get in and they corroded. cut out bad spot and re attached.

Jul 10, 2009 | Chevrolet C3500 Cars & Trucks

1 Answer

Turn signals dont work but hazzard lights do.


sounds like the directional switch maybe bad (lever on steering column ) if u open the column u can test the wires and see if it is passing current to tail lights have seen these go bad many times in older jeeps

Jul 08, 2009 | 1996 Jeep Cherokee Sport

1 Answer

Turn sinals won't work, turn on hazzards they worked but buttom /hazzard went into dash board


replace the turn signal switch fuse.if they dont work after replacing fuse.check to see if switch getting power if yes replace turn signal switch.if not you have a electrical problem.you have to remove the center cluster.like the radio.to reach the hazzard switch.besure to turn off radio. disconnect negative battery cable.wait 20 minutes let air bags discharge.when working on instrument cluster or steering wheel area.air bags has to be disable.

Jul 01, 2009 | 1999 Oldsmobile Alero

1 Answer

Turn sgnals, hazzard flasher and brake lights dont work


Sounds like either a fuse or bad flasher. Do the the turnsignal lights  light up and stay on?

Dec 19, 2008 | 1995 Mercury Sable

2 Answers

Turn signal stopped working. Can not find the relay fuse


My signals do not work on my 1999 chevy venture, neither does my hazzards. i checked the fuses and they are all good.

Aug 07, 2008 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1999 Chevrolet 3500 Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...