Question about 2013 Ford Expedition

Open Question

How to get the ford expedition seat not to recline when door is opened

When we unlock the doors to the expedition the drivers seat reclines all the way back until it touches the back seat.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: front seat stays in the reclined postion..

The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Posted on Jul 28, 2008

Ad
  • 184 Answers

SOURCE: my front seats on my fiesta 54 reg are broken i have to recline t

I TAKE IT YOU CAN'T USE TILT ON YOUR SEATS MOST LIKELY TO BE BROKEN CABLES YOU WILL REQ CABLES & BOTH SEAT HANDLES TO DO JOB OULD NOT RECOMMEND IT THOUGH AS ITS A PAIN OF A JOB TO DO.RECOMMEND BOOKING INTO LOCAL FORD DEALER AS THEY PROBABLY HAVE PARTS IN STOCK.

Posted on Feb 11, 2009

  • 77 Answers

SOURCE: rear doors on my 2003 Ford Expedition won't lock/unlock

check if it will work with the child locks engaged/disengaged if nothing the lock actuators may be worn out.

Posted on Aug 01, 2009

emissionwiz
  • 76109 Answers

SOURCE: 1997 Ford crown victoria, driver seat stuck in

is this recline power operated?

Posted on Sep 14, 2009

lilward5
  • 5 Answers

SOURCE: how to remove front driver side door panel (2000 ford expedition)

There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and remove the screw holding the handle to the door. Look through, where door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift the panel in an upward direction.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 2008 expedition, power drivers seat won't recline, but everything else works.


Power Recliner
The driver seat has an electro-mechanical backrest adjuster. The backrest adjustment switch is located on the side of the seat cushion side shield and is part of the seat control switch. The recliner motor is mounted to the backrest frame. Power recliners and motors are only serviceable by installing a new backrest frame assembly.
Does yours have Driver and Passenger Power Seats Without Memory Or Power Driver Seat With Memory ?

B1666 Seat Driver Recline Motor Stalled On-Demand If the motor does not operate, Go To Pinpoint Test L . If motor operates, Go To Pinpoint Test M . Take it an have it check !
Does your

May 15, 2016 | Ford Cars & Trucks

1 Answer

How can we adjust driver's seat so it isn't reclined?


If the lever that controls reclining does not work, some previous owner probably broke the mechanism.

Apr 07, 2016 | 1990 Oldsmobile Eighty Eight

2 Answers

Power seat won't recline


My 2006 honda accord drivers seat makes a clicking and grinding noise when i try to put it in the recline position.It will go back about halfway and stop and make this noise, does anyone have a suggestion?

May 05, 2009 | 2006 Honda Accord

1 Answer

My front seats on my fiesta 54 reg are broken i have to recline t


I TAKE IT YOU CAN'T USE TILT ON YOUR SEATS MOST LIKELY TO BE BROKEN CABLES YOU WILL REQ CABLES & BOTH SEAT HANDLES TO DO JOB OULD NOT RECOMMEND IT THOUGH AS ITS A PAIN OF A JOB TO DO.RECOMMEND BOOKING INTO LOCAL FORD DEALER AS THEY PROBABLY HAVE PARTS IN STOCK.

Feb 11, 2009 | 2004 Ford Fusion

1 Answer

97 Ford Explorer - Driver Seat Repair- 2 Dr V6 SOHC


you can replace the recline lever assy without removing the seat

Jan 16, 2009 | 1999 Ford Explorer

1 Answer

Could all this be an electrical problem?


open the drivers door look in the opening locate a black rubber tube then locate the driver kick panal located at door opening and floor remove the panal locate where the black tube comes through push tube out you will expose wires you will find one or more wires broken most all camrys does this as far as the trunk it sounds as though your cable poped off or broke hope this helps if you need more help please contact mo via E-MAIL @ royhyreno9@yahoo.com

Jan 15, 2009 | 1999 Toyota Camry

1 Answer

Passenger seat 2006 vw jetta


I don't remember which knob adjusts that area for the seat but if it's like the one I used to own, much older model, it had a turn knob on the side of the back rest that you had to actually turn to get it to do that recline position. Look at your seat and see if it has a large knob on the side of the back rest and if it does, turn it until the seat reclines. I think it does. but not sure. if it doesn't then look on the side of the seat by the door for a lever there to see if that is the lever to make the seat recline. Vw has more than one knob most of the time. you can also check your owner's manual for seat adjusting and it should tell you something.

Aug 08, 2008 | 2003 Volkswagen Jetta TDI

1 Answer

Front seat stays in the reclined postion..


The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Jul 22, 2008 | 2000 Ford Focus

1 Answer

Passenger side seat reclining device


check the adjusting bar on the pass. door side of seat.

May 20, 2008 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
2013 Ford Expedition Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...