Question about Ford Econoline Cargo

Open Question

High beam light will not turn on ford e450 2002

Headlights on low work no headlights on high no light in dash on for high ford e-450

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: DRL and High Beam do not work right on Honda Accord EX 1998

Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.

Posted on Jun 10, 2008

  • 193 Answers

SOURCE: high beams wont turn on.

First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Posted on Nov 19, 2008

  • 1244 Answers

SOURCE: 2001 Ford Focus - High beam / low beam problem with headlights

just replace the dimmer switch under the column its wore out on the low beam side

Posted on Jan 17, 2010

Testimonial: "It's great to know that there's not a whole lot more to check! I wouldn't have guessed I was so close. Thanks!"

  • 14 Answers

SOURCE: camry headlights not working

it sounds like a bad light switch

Posted on Mar 25, 2010

dttech
  • 4803 Answers

SOURCE: 2005 Ford Focus ZX3 SES, the blue high beam

It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

Posted on May 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both my low beam and high beam wont work. And my headlights wont go down even when lights are turned off and the button is unpressed on the inside.


check the headlight relays ,
Check for possible faulty light stalk switch also. Dash lights may fail with this possible cause.
Check fuses

Jan 25, 2016 | 1992 Mazda MX-5

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

2 Answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...


It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

May 08, 2011 | 2005 Ford Focus

1 Answer

98 ford lariat. Headlights stopped working. running lights come on and brake lights and turn signals. checked all fuses under dash and under hood, pulled out headlight switch and it looks fine. note only...


Is this both the high beams and low beams that do not work ?

If you checked all 3 fuses with a meter ( with the headlamp in Low position for both low beam fuses or in high for the high beam fuse ), the next items to test are the MFS ( MultiFunction Switch ) and the main headlamp switch ( test not look at it ).

The main headlamp test chart
568bbbb.jpg

The test chart for the MFS
4fc6f66.jpg
097ea29.jpg

Oct 25, 2010 | 1998 Ford F150 Regular Cab

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

2 Answers

1996 ford ranger headlights not working


It's the dimmer switch in the column.

Jan 06, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Ford Focus Flight 2005


The main/high beam relay/switch must be stuck on high presuming the high beam stalk selector does not operate. Probably needs replacement.

Oct 17, 2008 | 2005 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...