Do 1990 Toyota corollas sedan x have immobilisers? A red light is flashing on the right side if the steering wheel and it won't turn on

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Brayden Schaechtel

• 173 Answers

SOURCE: I have a 1998 Toyota Corolla. There is a little

This is the immobilizer system, (anti theft) just means that your alarm is either set, or going off. if your alarm is going off, you may not be able to start your car. Hope this helps

Posted on Mar 20, 2010

Testimonial: "Thanks.Found out that my battery was weak and caused the immobilizer to go off.Its appreciated"

Chris Hingee

• 32281 Answers

SOURCE: replace steering wheel of toyota corolla 1990 model

The steering shaft has splines that allow the steering wheel to be positioned correctly with the front wheels.
Try tapping behind the streering wheel with a hammer to loosen so you can pull the steering wheel off.
If this does not work then you need a wheel puller to pull the steering wheel off the steering shaft.

Posted on Jun 10, 2012

Sudeep Chatterjee

• 3267 Answers

SOURCE: I can't start my Toyota corolla because of what the manual calls type a security. The red security light nearest to the door is flashing and the steering wheel won't turn. I remember when I first ent

Problems with the anti-theft systems using the raised-chip key can prevent the car from starting. The wires in the steering column to the ignition lock cylinder tend to break. The the key and ignition lock cylinder must be replaced to correct this condition, needless to say, the key too.
TIP: Try Cleaning the key with petrol/kerosene & try once. It might work if ignition lock is still OK

Posted on Nov 25, 2012