Question about 2001 Dodge Dakota
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
COULD BE LOSS OF ALL TRASMISSION FLUID, BROKEN HOSE, BLOWN PUMP,BURNT TRANSMISSION RINGS( HOW DID THE TRANNY OIL SMELL?) BURNT TRANNY FLUID OR A COMBINATION OF ANY OF THE ABOVE. IF IT JUST QUIT, YOU PROBABLY HAVE A SERIOUS PROBLEM THAT WILL REQUIRE A REBUILD OR A SALVAGE TRANSMISSION FROM A LOCAL WRECKING YARD. THE LATTER BEING THE CHEAPEST AND AT TIMES THE BETTER DEAL ALL AROUND, TIME WISE AND MONEY. VERSUS A REBUILD THAT REQUIRES NEW PARTS, BANDS, PUMP, SEALS AND ON AND ON PLUS HOURS OF LABOR TO FIX EQUALS ONE BIG BIG BILL!BEING A 2001 A TRANNY FROM A WRECKING YARD ISN'T GOING TO HAVE THAT MANY MILES ON IT EITHER SO YOU SHOULD BE ABLE TO FIND SOME PRETTY DECENT ONES. THAT'S THE ROUTE I'D GO, BUT YOU'RE FREE TO CHOOSE EITHER CHOICE. I DON'T ENDORSE OR CONDEMN EITHER ONE, JUST POINT OUT THE GOOG AND THE WEAK IN EACH FOR YOU TO DECIDE! GOOD LUCK! IF I CAN HELP REPLY TO: ARCLIGHT1217
Posted on Nov 12, 2008
SOURCE: 2001 dodge dakota crank no start
Just had that problem w/ my 01 Dekota, it was the resistor that used to be mounted on the firewall and easy to get to but that is now mounted low on the back of the engine jammed into a bey tight position. I couldn't get to it myself, so ended up taking it to neighborhood garage. Cost me about $150
Posted on Apr 16, 2009
well first take off the door panel it shouldnt be hard remove plastic cover off door.Make sure your window is all the ways up before you remove the motor.you can hold it up with duct tape or anything similar.Then remove the screw that go to the regulator sometimes it has rivets wich have to be drilled off.The new regulator should come with screws if it has rivets if not u use the same old screws.Also unplug the harness of it . Install new one,screw it on and reverse the procedure.Any problems keep me posted
Posted on May 23, 2009
SOURCE: 2001 dodge dakota lights flicker
check for battery short inside battery have some one check for ac voltage in battery and alternator out put,,,headlight switch would be next to check or replace
Posted on Jul 03, 2009
Tips for a great answer:
Sep 05, 2013 | 2001 Dodge Dakota
Aug 11, 2013 | 2001 Dodge Dakota
Oct 10, 2012 | 2001 Dodge Dakota
Apr 20, 2011 | 2001 Dodge Dakota
Feb 13, 2010 | 2001 Dodge Dakota
Dec 14, 2009 | 2001 Dodge Dakota
Aug 24, 2009 | 2000 Dodge Dakota Quad Cab
Dec 14, 2008 | 2001 Dodge Dakota
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: