Question about 2006 Chevrolet Trailblazer

Open Question

Got errors p060e p0128 p2138 p0014 po60e p0300

Changed throttle sensor still wont stay on rough idle and smokes alot

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
psds4
  • 293 Answers

SOURCE: I have a 88 chevy

is the check engine light on ? if it idling high chances are you have a vacuum leak take a can of carb cleaner and spray the egr valve and if the engine rpm changes replace egr valve the throttle body may also be plugged pull the vacuum line off the map sensor start vehicle and see if you have vacuum if not remove throttl body and clean vacuum passage hope this helps

Posted on Oct 05, 2008

Ad
dennymulford
  • 1055 Answers

SOURCE: fuel flooding in throttle body,map sensor problem

probly needs a complete tune up and a timing chain

Posted on Feb 27, 2009

  • 25 Answers

SOURCE: I own a 2002 Chevy Trailblazer with 4200 vortec

Do you know if the plugs were changed, a bad or broken plug will also cause rough idle and slow acceleration?

Posted on Oct 21, 2009

  • 1114 Answers

SOURCE: my 01 chevy blazer will idle rough. it gives me

Hello your po135 is o2 sensor bank 1 your po141 is O2 sensor bank 1 sensor 2 and your pO300 is random multiple cylinder misfire these problems are your oxygen sensors and engine misfire pO300 is you engine missing o2 sensors are switches in the exhaust system the engine misfires are the engines cylinders missing.

Posted on Jan 05, 2011

  • 23 Answers

SOURCE: Im getting a P0017, P0014,

po300 is a general missfire code if i rember right. there is more than likely an install procedure that will require you to clear all cods ( even if there is no code preasent ) before you install the new part or failure of those parts can happen

Posted on May 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code P060E what does the mean on chevy trailblazer


P060e Control Module Throttle Position sensor, check all voltage and ground inputs to the ECM for an open circuit or high resistance. The computer will clear this code after three consecutive ignition cycles with no failures. Hope this helps out some.

Apr 30, 2015 | 2005 Chevrolet Chevrolet TrailBlazer EXT...

1 Answer

HELP!! Many codes..


Check coolant level and strength ,thermostat,coolant sensor and temperature sensor,171 dirty fuel filter,dirty MAF sensor,bank 1 sensor 1 O2,PVC valve,vaccum leak,exhaust ,you can try smok test.

May 06, 2014 | 2006 Pontiac Grand Prix

3 Answers

Error code p2138


Here is the definition. You may need to have someone check the accelerator pedal position sensor and the circuit.

P2138 NISSAN Description The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
Read more: http://engine-codes.com/p2138_nissan.html#ixzz26J3D2x8s

Sep 12, 2012 | 2010 Nissan Versa 1.8

3 Answers

P0505 p1151 p0300 now rough low idle at400 500 rpm slow accel


Code P0505 is Idle Air ControlSystem. P0300 is Random Misfire. P1151 is Lack of HO2S21 Switches- Sensor Indicating Lean. Possible cause is Idle Air Control solenoid.

Jul 24, 2011 | 1999 Ford Super Duty F 450

1 Answer

Only cranks and stay if I give a little gas. I have changed the converter, spark plugs & wires, and put fresh gas & treatment in the gas tank. If I hold idle over 1 RPM it runs smooth, but if i let...


Test the TPS Sensor & replace the front
O2 Sensors if they have 100,000 miles on them

Clean the MAF Sensor with CRC MAF Cleaner,
Spray the throttle plate with the CRC throttle body
cleaner

Check for vacuum leaks

You may have to have a shop smoke test the
intake & other items

Jun 09, 2011 | Ford Escort Cars & Trucks

2 Answers

01 camaro drive by wire reduced engine speed


This is what I find from other webpost..

Condition:
Some customers may comment on an MIL/SES light Illuminated with the" Reduced Engine Power" message or indicator displayed. A technician may find two or more of the following DTCs stored in the ECM:

P060E : Control Module Throttle Position (TP) System Performance

P1516 : Throttle Actuator Control (TAC) Module Throttle Actuator Position Performance

P2135 : Throttle Position (TP) Sensor 1-2 Correlation

P2138 : Accelerator Pedal Position (APP) Sensor 1-2 Correlation

Cause:
A battery voltage drop during the cranking cycle may cause the codes to set and place the vehicle into the reduce engine power mode.

Correction:
Test and charge the battery using the steps below.

Important: A low voltage condition may cause at least two of the following DTCs to set.

P060E : Control Module Throttle Position (TP) System Performance

P1516 : Throttle Actuator Control (TAC) Module Throttle Actuator Position Performance

P2135 : Throttle Position (TP) Sensor 1-2 Correlation

P2138 : Accelerator Pedal Position (APP) Sensor 1-2 Correlation


Perform a Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in SI.
Check for DTCs and review the Freeze Frame/Failure Records to determine if sufficient ignition voltage was present when the DTC set.
- If the ignition voltage was low, then check for a possible battery drain. Refer to Battery Electrical Drain/Parasitic Load Test.

- If the ignition voltage was sufficient when the code set, proceed with normal SI diagnosis for the code(s) set.

Test and recharge the battery using Bulletin 02-06-03-009 or latest version on "Battery Charging Tips'.
Clear all DTCs.

Oct 18, 2008 | 1999 Chevrolet Camaro

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...