Question about 2006 Mazda 3 1.6
Replace it . I have found to repair it costs more than a replacement.
Posted on May 31, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2008 mazda3
Start by removing the colored strip which is over the radio display.
(best way is to open the glove box and get underneither it, the right end kind of hooks in at an angle while the left end locks in straight. so work your way to the left first and then the right)
once that is removed, you shuold see four (4) standard screws, remove and save them.
You must remove the top air vent piece, just tip up and pull forward gently.
You will have to disconnect the hazard switch plug also
the stereo set can now be removed by pulling forward gently.
Only two cables are connected to the unit, one can be pulled out, the other must be unclipped.
At this point the WHOLE UNIT including DISPLAY should come out of the console.
On mine, there were directions on how to install and uninstall the CD/MP3 player and if you flip it over you can see where the MINIDisc would go (if you don't have one)
Posted on Jun 13, 2008
SOURCE: Mazda3 Immobiliser
yes i can surely help you for this.
this is the link to help you for any type of car problems
for car regarding questions:
best site for reparing cars
feel free 4 further assistance .rate the particular experts solution as fixya that helps u understand n solve ur problem
Posted on Jun 29, 2008
It should be hit the unlock button 3 times, open and close the door 3 times, the locks will operate themselves twice. Hit the unlock button on the remote and it should program. you should try a remote from the dealer not from ebay.
Posted on Dec 18, 2008
The P2251 error code means you will need to replace the front O2 sensor (the oxygen sensor that bolts into the exhaust manifold accessible under the hood)
Posted on Jan 27, 2011
Tips for a great answer:
Oct 19, 2014 | 2014 Mazda MAZDA3
Aug 21, 2013 | 2010 Mazda MAZDA3
Aug 31, 2009 | 2006 Saturn ION
Aug 02, 2009 | 2009 Mazda MAZDA3
222 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: