Question about 1995 Oldsmobile 88

Open Question

Oldsmobile diagram motor mount is in the way I cant put on my belt

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2000 OLDSMOBILE AURORA SERPENTINE BELT DIAGRAM

Look on page 6-70 of your owners manual. It is listed under Engine Accessories Belt

Posted on Dec 07, 2008

  • 1 Answer

SOURCE: serpentine belt diagram

There should be a factory diagram at the front of the radiator top plate near the passenger side. That's where it is on mine, and it shows with and without AC. I hope that helps

Posted on Jan 25, 2009

  • 326 Answers

SOURCE: im trying to put on my serpentine belt on my 98

this particular engine requires the removal of the engine mount in order to replace the serpentine drive belt i know it,s not fun but has to be done

Posted on Sep 03, 2010

czaa
  • 4514 Answers

SOURCE: i have a 1986 Oldsmobile

an auto parts cud help you--they would havit on computer and help put in on

Posted on Sep 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I cant remove the motor mount or timing cover?


It's as simple as unbolting it. If you don't have the strength, get a mechanic.

Mar 23, 2011 | 1997 Mitsubishi Eclipse

1 Answer

How do i replace the tensioner pully on my 1996 chevy cavalier


It's pretty easy take the serpenten belt off if it has a motor mount on top of the serpenten belt you will have to jack up on the motor on the right side to releive the pressure on the mount remove the mount and tensioner should be a 13 or 15 millimeter bolt remove install new one put serpentine belt on then motor mount good to go thanks.

Feb 28, 2011 | 1996 Chevrolet Cavalier

1 Answer

Im going to have to change my serpentine belt on a 96 buick park avenue. 3800 non supercharged. Looked at it yesterday and it looks like I have to unbolt motor mount to get the belt off? Is there an easier...


yes.that is the only way.You have to unbolt the motor mount. To replace the serpentine belt on a V6 3800 series non-supercharged motor, you must jack up the motor and remove a motor mount. Before going any further make sure that the factory belt diagram sticker is still somewhere under the hood; if not, make a detailed diagram of the path of the belt. You must then use a breaker bar with a socket (I believe 13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack. Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Aug 02, 2010 | Buick Park Avenue Cars & Trucks

2 Answers

When iput my car in gear i can fell the motor raise up with a thump noise also fan belt makes a winning sound


The Motor raising up issue is, you may have a worn or broken Engine or Transmission Mount, inspect the mounts by having someone or you, look at the mounts while someone else puts the car in gear. If you see the mounts move excessively, than the mounts need to be replaced. The whining or squealing Fan Belt may be a worn, glazed or loose belt. I would inspect the belt and tighten or replace as needed.

Jul 05, 2010 | 2001 Nissan Quest

1 Answer

Buick Skylark 1996


i had the same problem you have to make sure the motor is supported and then take off the mount from the frame to the motor so the bolt's dont thread wrong from there take off the left bracket below the starter put the belt on not all the way yet put the bracket back on make sure the belt is in the grove it go's in then put the mount back on release the motor slowly and release the tension and put the belt on make sure in the grove's not any over hang make sure follows the map too put the tension back on and wallah all done hope this help's

Mar 10, 2010 | 1996 Buick Skylark

1 Answer

I can not get it past the motor mount


if it's a 3.8 the mount comes apart at bottom it looks solid but it's a bushing

Mar 09, 2010 | 1996 Buick Skylark

1 Answer

Belt routing on my Olds 98 LSS. It looks like I


on the v6- 3.1 yes you do. here is how to change it yourself, first of all, release tension on the belt tensioner. remove belt from pulleys, place a floor jack under engine on motor mount side to take off. put a piece of wood on jack to protect engine. jackup to engine with very slight pressure to hold it while removing mount. take off mount, remove old belt, put new belt on. the tensioner can be moved with a 3/8 drive in tensioner hole. after belt is on replace mount. then lower jack down. thats it!!

Feb 15, 2010 | 1998 Oldsmobile LSS

1 Answer

I cant figure out how the ac belt goes on....94 civic vtech


You have to support the engine with a floorjack and then disconnect the left motor mount. The belt slides through the gap and then you reconnect the motor mount. You probably have to remove the left front tire.

Aug 15, 2009 | 1990 Honda Civic

1 Answer

Changing A/C belt


yes sometimes the upper mount or center mount located on the pass side of the motor compartment has to be removed to replace the belts,just put a jack under the motor to support it when you undo the mount.

Mar 30, 2009 | 1995 Honda Civic del sol

3 Answers

Can not get the serpentine belt around the motor mount


on some of the 3.8 you do have to remove the motor mount,there is no way around it. It is not as bad as it sounds.

Feb 20, 2009 | 1993 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...