Question about 1996 Ford Mustang

1 Answer

Window does not lay flush with rear window

In my 04 mustang convertible the driver's side window does not lay flush with the back window on the same side so there is a gap between the two windows when the top is up any thoughts

Posted by on

  • scarfac14 Jun 20, 2009

    no it has not it just wont go all the way up to the top

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

The windows can be adjusted.Has the car ever been wrecked on that side?

Posted on Jun 20, 2009

  • Steve
    Steve Jun 20, 2009

    You have to take the door panel interior trim panel off. the window has stops that can be adjusted to let the window go up more

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 mustang 5.0 lx conv rear power window does not go up or down


More than likely it is going to be the switch on the drivers side door. The "master switch" if you will for all of the windows. It is possible that the ground connection came loose from the motor, or there is simply a short in the wiring. Nine times out of ten it is just a problem with the switch. Personally I have a 1995 Mustang GT and my rear drivers side window would not go down. I replaced the switch "it will have controls for all four windows" and now it works fine.

Jul 08, 2010 | 1993 Ford Mustang

1 Answer

91 ford mustang convertible driver side rear window is off track or something as it wobbles around and does not roll up and down smoothly


you going to have to take it apart to get to it, is not that hard but time consuming; the parts is cheap. The common problems with those is the regulator is worned and need replacing. regulator is a window track, it keep the window in it track and when it become worned it get sloppy. hope that help some

Oct 04, 2009 | 1991 Ford Mustang

2 Answers

Driver Side window not going back up when the door is closed


you cant do it yourself because if iam not mistaken its a module ......ie the vehicle has no wires only a feed wire and a bus line which recieves a computer signal ,to activate the whatever.Hence its a dealer only job because as the door locks are inside the door this means that the software can be encrypted as its classed as security .

Sep 02, 2009 | 2007 Ford Mustang GT California Special...

2 Answers

I have a 2004 Ford Mustang convertible. My back


i would take this to a window and glass place. this way you get a warranty

Aug 04, 2009 | 2004 Ford Mustang

1 Answer

Electric rear windows 1988 mustang convertible not functioning


remove te rear trim panels and replace the window regulators, this is very common.

Jul 10, 2009 | Ford Mustang Cars & Trucks

1 Answer

Mustang rear window...fuse or motor?


first check the fuse.if its good then check the window motor by pressing the button and if you dont hear the motor going theres your problem, needs to be replaced.  unfortunatly the motor isnt sold by itself you got to buy the window regulator. here is a pic. of the part29159f3.jpg

Apr 26, 2009 | 2000 Ford Mustang

1 Answer

Passenger side window not rollin up properly. 2004 Mustang


i think ur window power motor need to change

Apr 17, 2009 | 2004 Ford Mustang

1 Answer

89 ford mustang convertible


This is a professional job for a conv. top shop. has to be sewn in at the bottom.

Removal
NOTE: Mark vinyl to be removed so it can be returned to the same position after disassembly.
  1. Remove sail area panels as outlined.
  1. Remove staples retaining elastic straps at each side of back window glass (42006) to rear tacking strip and folding top rear number 4 bow (51278) and remove elastic straps.
  1. Remove staples retaining rear bow corner pad (537A71) and bottom of folding top back window curtain (52500) to rear tacking strips.
  1. Remove staples retaining top of folding top back window curtain to folding top rear number 4 bow and remove back window glass .
1994 mustang. don't have 89 Window, Rear Installation
NOTE: Transfer markings from the removed assembly.
  1. Mark with grease pencil center point on folding top rear number 4 bow in line with hole on rear of folding top rear number 4 bow .

Oct 07, 2008 | 1989 Ford Mustang

Not finding what you are looking for?
1996 Ford Mustang Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...