Question about BMW 535

1 Answer

Windows will not go up or down cetral locking system does not work when I push the power windowbutton all I hera is a clicking noise under the left rear seat 735I

Posted by on

  • lrhamilton Jun 21, 2009

    ll cables are tight on central locking system and fuses have been checked ll are
    okay

    How about the prblem with my power windows not being able to go up or down
    whn I push the buttons on the console

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

Hello!

If all windows are not working there could be an issue with the electrical system of your power window. Beneath the central control on the driver side door you could check if the cables are properly connected to the switches. If they are you can check if there is voltage passing through the wires. Others use a small 12v bulb to connect one end of the terminal to the car's chassis or ground to test for power or you can use a tester. If there are none flowing you may have a blown fuse. I am not sure if the central lock for the windows may cause this if it has gone bad.

Also a common issue when this happens are bad relays or have loosened up on their connections.

See if this helps. Thank you.

Posted on Jun 20, 2009

  • Nicolo Carlo Parazo Jun 21, 2009

    this could mean a bad relay. These are the ones that switch the current to make your motor go one way and another

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power windows not working


1 does the led's light up on the master window switch [drivers side] 2 when you rocker the drivers side down can you hear a audio click down under the steering wheel. the i/p fuse panel is down there where you rest your left foot.3 power is from battery saver relay to master ins. relay to one touch window relay. this is the one you should hear click. the back side of this fuse panel calls out the locations down there. the owners manule also helps some.4. if you take the interior door cover off remove the screw on extenstion on door lock and one screw under plastic button where you pull the door shut.arm rest support bracket. the rest is held in place with snap in plastic buttons [christmas trees like]. the door latch unlock should slide out of the opening when you slide it froward.there are 4 male/female electrical connections, 2 to the master door switch.one to the power/heated mirror, 1 to power locks. 5. don't unsnap them yet.with a test light you can check for battery voltage. on the master door switch the blue/black tracer wire should be hot[12 volt dc]. at all times. put one end in the backside and the other to a bolt or rivet on the door. the light should come on.next with one end on the blue/black tracer and one on white/black tracer rocker driver side up/down switch, the light should come on.there are only 13 wires on the master window switch 2black wires are ground, 2blue/black tracer[hot] 1 red/blue tracer should be [hot] when you unlock the window lock rocker switch.know the passanger and back seat switches should work. switch it to lock and they should only work from the driver side master switch.the 8 wires left are 2 for each window one up one down.try this with a friend it makes it easyer. good luck doug.

Sep 10, 2012 | 1997 Ford Taurus

1 Answer

I have a 1995 ford windstar. The driver side power window stopped working in the up position. When I depress the switch to lower the window, I hear a clicking noise like a relay coming from under the dash...


The clicking noise doesn't mean anything , relay controls one touch down . Just means relay is probably working ! Take the door panel off an check power to the switch , motor . Watch this videos . Test the electrical circuit The Trainer 24 Power Window Troubleshooting
Automotive Electric Window and Switch Troubleshooting Repair Guide

The motor or the switch or the regulator or maybe be a wiring problem .

Oct 11, 2017 | 1995 Ford Windstar

2 Answers

My 1998 ford f150 4x4 has electrial problems. The dome light, power windows, wipers,electric door locks are not working. Any ideas


Hi, this might be caused by a blown fuse. Check all fuses as there are some systems integrated with others running from the same fuse. If all the fuses are fine you will need to look at the earth connections and power supplies to the systems.

Nov 20, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Pass.side power window won't work.


First be sure the window lock in the drivers side master switch is not LOCKED. This will prevent the windows from being rolled down by any other switch. (p106+)

Usually windows operate off a RELAY - not a fuse... and all the windows work off the same power relay.

Your Relay Part Number is 41-5021.
Here is the electrical schematic for your windows - showing the relay is common to all windows.

6713bdf.gif
CLICK HERE for a better pic.

If the relay is replaced - and/or tested good, You will need to remove the offending door's panel and verify the motor is getting 12VDC when you press the button for it to go down.

If there is 12VDC when you push the button, the motor is bad.

If there is NOT 12VDC when you push the button - the master switch or child lock bypass switch is faulty.

Click HERE for a PDF version of your owners manual

Under the ROADSIDE EMERGENCIES section (p.245) you will find a layout diagram of your fusebox.

P.248 instructs to pull DOWN on the fusepanel door to access... however your power window relay is located under the driver's side dash.



If the other windows work - there are 3 options to test/replace - in this order
1. Relay
2. Master Switch
3. Window motor.


Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Mar 20, 2009 | 1998 Mercury Villager

1 Answer

Power windows, locks, and seat not working


That Clicking should be a Bad Relay Switch. See if you can Locate it and Replace it. It should fix this Problem for ya! Please Rate My Response! Thanks!

Jan 31, 2009 | 2005 Jeep Grand Cherokee

1 Answer

2005 POntiac Grand Prix-All windows not working


Under the Hood there is a Fuse Relay Box that has Relays in it. There is a Relay in this for the Windows. Replace this Relay. If that does not work it very well could be the Motor on the door Making the Noise and you will need to replace the motor.

Jan 22, 2009 | 2005 Pontiac Grand Prix

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...