Question about 2007 Jeep Liberty Sport

1 Answer

What does $07e8 code mean? - 2007 Jeep Liberty Sport

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Wow, seen where, radio, nav, or cluster? or?
why not say where your finger is pointing.(or eyes gander)


means someone used the passenger ejection seat.
(due to nagging mother-in-law)
over 7000 pages in the FSM, takes long time to scan this.

is this some autel scan tool bull
where it gives an odd code
then you look it up in there silly manual
and find what it really means?

i see one hit, in google for P0300 is true code
why not use a real scan tool and stop fooling about.
or ask any shop in town, no dealer needed. 99% of time.

Posted on Feb 11, 2016

  • Anonymous Feb 13, 2016

    next time say where you saw that.
    we can never see where your eyes are pointed.
    not here, not ever.
    dash,
    scan tool yours
    or looking over autozoned shoulders. or worse.

  • Anonymous Feb 13, 2016

    use a real scan tool and win.
    see all errors, and real jeep errors
    not fake ones.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ITEM 98568 P2138 $07E8 1/2 GENERIC THROTTLE/PEDAL POSITION SENSOR SWTCH D/E VOLTAGE CORELATION


You need to understand the causes of this fault, it is not always the throttle pedal sensor, it can also be wiring or the throttle valve sensor. Read about it at the link. P2138 Throttle Pedal Pos Sensor Voltage Correlation DTC

Jun 20, 2017 | Cars & Trucks

1 Answer

Cobalt 2009 4 cyl check engine came on so the code reader show 07E8


Did you try to sann parts store?do you have vaccum leak?

Mar 30, 2016 | Cars & Trucks

1 Answer

Engine Code P0171 Logged


If Short term # is high while underway, but normal while idling, you could have a scewed maf signal. Sometimes cleaning maf with carb cleaner helps. If no intake leaks are found, and fuel pressure and volume are ok, it could be maf sensor.

Jan 18, 2016 | 2007 Toyota Hi-Ace 220

1 Answer

Recently purchased. MIL light on - Scan tool Shows code P0171 $07E8 Monitor / GenericLean Trim.


First of all, what kind of car is this? Second, this is a lean code. Now, if you really have no intake leaks or restricted fuel issues, one possibility is scewed maf signal during higher rpms. If you can, monitor your Short Term fuel trim at normal highway speeds.If it is high, then and lower at idle, you may need a maf sensor.
Hope this helps

Jan 18, 2016 | Cars & Trucks

1 Answer

What is Saab code 1125 &07E8


The code 1125 is your throttle body, when they get dirty or stick they toss up a code. It will need to be replaced or cleaned. On Ford or GM cars we just remove them carefull not allowing dirt or tools to fall in after removing. Get some carb cleaner and clean all the dirt and carbon grime, out of it. be careful not to damage the sensor. Ask shop about cleaner you use not sure about safty on car made in Europe. Put back and things should be ok, If not you will need to replace it. Other code I believe is a junk code. readers seem to be not able to read sub codes unless it is from factory.

Jan 31, 2015 | Saab Cars & Trucks

1 Answer

Engine codes for a 1998 plymouth voyager


okay, 1998 voyager these are not obd2 codes, these are genric codes, you used ignition to get these .
these codes are for older models that use codes like these 12 35.
the newwer obd 2 use codes like po 013. i will try to see what i can find, also the engine size is important.

okay here we go, the first code is 12, this code means the battery was dead or dissconnected.
the next code 35. this code means loss of prime, code # 11
means internal transmission failure.
the code 55 means gear ratio error.

these codes would tell me that you have transmission problems. this may mean internal trans failure and a rebuild or replacement transmission is needed or shift pack needs replacing. anyhow i would have a shop check this out, these van are known for transmission problems. hope this is helpful good day

Feb 03, 2013 | Plymouth Voyager Cars & Trucks

1 Answer

What's (mil requested) mean?


P0700 means transmission control fault detected,either it is mechanical or electrical.This code is a generic code,you will need a enhanced code that mean a manufacture scantool or a scan tool that can read enhance code.

Mar 28, 2012 | Cars & Trucks

2 Answers

03 dodge durango trouble code "p done" appeared where the milage is displayed, what does it mean?


"P done" means there are no codes stored. If there were codes you would see P and 4 numbers.

May 27, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
2007 Jeep Liberty Sport Logo

Related Topics:

1,845 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...