Question about 2000 Ford Expedition

1 Answer

High temp oil light coming on and off, oil pressure gauge reading

Low. Temp for car at normal and a slight tapping noise. Oil is only 1 quart low. What could this be.

Posted by on

  • mike loshbough
    mike loshbough May 11, 2010

    this is your transmission oil have it checked

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 3,433 Answers

Add the quart of oil. Oil also acts as a coolant.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil light comes on once temp gauge is up to normal.


could possibly be a faulty oil pressure switch which is located in the block or the head single wire sometimes an engine will have 2

Jun 16, 2016 | 2006 Seat Alhambra 1.9

2 Answers

High temp low oil pressure light comes on after driving for a few minutes, then off when engine at driving rpm. At stop light (idle or low rpm) light comes back on. Normal driving it goes out.


You need to find out why you have low oil pressure. It is normal that as engine rpm's increase, the oil pressure will rise- the oil pump is moving oil faster. Even though your light goes out, you could still have critically low oil pressure. There should be sufficient pressure at idle to keep the light off. The light will come on when your oil pressure is almost nil- I believe for some it's as low as 8 psi. Normally, oil pressure at idle is specified anywhere from 15 to 40 psi. You would have to check specifications for your Expedition. To verify oil pressure, hook up a mechanical gauge at the oil pressure sending unit on the engine block. Check with a local shop.

The causes run from easy, simple to budget busting ruin. Low oil level, wrong grade oil, real old oil, oil leaks, internal oil leaks, worn oil pump, worn crankshaft bearings. It was pretty common on older very high mileage cars to have a fluttering oil light at stops and idle. It was time for a rebuild, or time to look for another car.

Jul 06, 2015 | 2003 Ford Expedition

1 Answer

Oil low/high temp light onand oil pressur gage is at low


chekc the oil level. if it is ok then put an oil pressure gauge on it and get an accurate pressure reading. if it is at an acceptable pressure change the sensor

Apr 18, 2014 | 2002 Saab 9-5

2 Answers

How can i fix the oil pump


see this tips and fix it. God bless you
The oil pump supplies oil to lubricate your engine. If the oil pump is worn or is not turning, the engine will suffer a loss of oil pressure, which may result in engine damage or engine failure.
The first sign of trouble may be a low oil pressure warning light, a drop in the normal reading on you oil pressure gauge (if your car has one), or the appearance of ticking or clattering sounds from your engine.
As a rule, most engines only need about 10 PSI of oil pressure for every 1,000 RPM of engine speed. Oil pressure will read higher than normal when a cold engine is first started because the oil is thick. Oil pressure will gradually drop as the engine warms up and the oil thins out. So normal oil pressure on a warm engine cruising down the highway is typically 30 PSI up to 45 PSI.
SYMPTOMS OF OIL PUMP TROUBLE
The first thing you should do if any of these symptoms occur is to stop your car, turn off the engine, let it sit for a few minutes, then check the oil level on the dipstick. If the oil level is at or below the ADD line, add a quart of oil to bring the level back up to the full mark. Add as much oil as is needed to raise the level to the full mark. Then restart the engine. If the warning light remains on, or the oil pressure reading does not climb back up to its normal range, or the engine noise does not go away, you may have a bad oil pump.
The other possibilities include a bad oil pressure sending unit, or a problem with the oil pressure warning light circuit or oil pressure gauge.
OIL PRESSURE SENDING UNIT
If the engine is NOT making any unusual noises and seems to be running normally, and the oil level on the dipstick is FULL, but you are still getting a low oil pressure warning light or low gauge reading, the fault could be a bad oil pressure sending unit.
The oil pressure sending unit is mounted on the engine block. On some applications, there is a spring-loaded pressure-sensitive diaphragm with a switch inside the sending unit. This switch completes the circuit to the low oil pressure warning light if oil pressure drops below a certain threshold. The unit may stop working if the diaphragm inside fails, if the switch is stuck, if the small hole that allows oil to enter the sending unit becomes plugged, if there is a loose, corroded or broken wiring connector at the sending unit, or there is a fault in the wiring circuit between the sending unit and warming light.
On vehicles that have an oil pressure gauge (electronic, not mechanical), the oil pressure sending unit has a small rheostat inside that sends a variable voltage signal to the oil pressure gauge when the diaphragm moves. A worn spot on the rheostat or any of the other problems just described for the simple pressure-type oil pressure switches can cause a problem.
FORD'S FAKE OIL PRESSURE GAUGE
On many Ford vehicles that were built from 1980 through the 1990s, the oil pressure sending unit has two switches, a low pressure and a high pressure. These vehicles also have an oil pressure gauge, but the reading on the gauge is not a true indication of real oil pressure. As long as the pressure to the sending unit is between high and low, the gauge will read normal. If oil pressure drops and trips the low pressure switch, the dash gauge will now read low. Or, if oil pressure goes up and trips the high switch inside the sending unit, the dash gauge will read high. Consequently, don't rely on the oil pressure gauge for an accurate reading in these vehicles. It is only a gross indication if the oil pressure is low, normal or high.
OIL GAUGE PROBLEMS
If the engine is NOT making any unusual noises and seems to be running normally, the oil level on the dipstick is FULL, and you have replaced the oil pressure sending unit but are still getting a low oil pressure reading on the dash gauge, the fault could be in the wiring circuit between the sending unit and gauge, or the gauge itself might be bad.
Check the wiring connections on both ends as well as wiring continuity between the sending unit and gauge. If no wiring faults are found, hook up a pressure gauge directly to the oil pressure port on the engine and check oil pressure with the engine running. If the engine-mounted gauge shows normal oil pressure but the dash gauge is reading low, the problem is a bad dash gauge.
On the other hand, if the engine-mounted pressure gauge reads low and you have done all of the above, chances are the oil pump is worn, or it is not picking up enough oil because of a restriction or blockage in the pickup screen in the bottom of the crankcase.
OIL PUMP PICKUP PROBLEMS
The pickup tube has a screen on the end to prevent large chunks of anything bad that ends up in the crankcase from being sucked into the pump. But we are talking BIG chunks of debris, not normal wear particles or carbon or dust or other microscopic-sized abrasive particles that can cause pump wear over time.

Sep 28, 2012 | 1996 Toyota Tercel

1 Answer

Oil pressure gauge on 1997 jeep wrangler 4.0 is coming in. shows no pressure at zero. changed sending unit, and filled oil to full but still is coming in. also when at 55 or higher mph, pressure is below...


check it out manually with a pressure gauge ,could just be a high resistance or something ,but check with a manual dial gauge and if low check put the oil pump

Apr 19, 2011 | Jeep Wrangler Cars & Trucks

1 Answer

I have a 2003 Bonneville. The oil pressure gage is spiked at 120. Over the past couple of years I have had to put a quart of oil in between oil changes only every once in a while. Since this problem with...


chances are the oil pressure sending unit is not working or unplugged it is located by the oil filter. the low level oil sensor is in the oil pan and is not related to the gauge .make sure to tell the parts person weather oil sending unit is for a gauge or a light

Feb 17, 2011 | Pontiac Bonneville Cars & Trucks

2 Answers

Oil pressure gauge reads normal when first starts. as it warms up, gauge goes to zero. If I rev engine, gauge goes back to normal.


Two things...when it reads zero, is there any engine noise (tapping or knocking)? After you rev the engine does the pressure read normal at idle and function normally, or does it go back down? Either way, you should not drive the vehicle 'till you have a mechanical gauge (yours is electro-mechanical) put on there and the actual pressure is tested. The condition may be a bad sending unit, a bad bearing or possible obstructed oil pump screen. The repair is obviously different for each one and the price is as well.

Oct 20, 2009 | 2002 Jeep Grand Cherokee

1 Answer

What is the check gauges light


CHECK GAGES light (1) indicates a potential engine failure(low oil pressure, low coolant, coolant overheating) has occurred.
· Check gages and shut down engine. Gages should read as follows: Oil pressure 5 to 10 psi (34 to 69 kPa) at idle; Water Temp gage below 230 degrees (110 C).
· Check engine oil level (Para 2-11) if OIL PRESS gage indicates low reading. Check coolant level (Para 2-11) if Water Temp gage indicates high reading. Notify Unit Maintenance if levels are low.

If CHECK ENGINE light (2) is on, check engine oil pressure gage (3) and water temperature gage (4). If both indicate normal, proceed with mission and then notify Unit Maintenance. If either one does not indicate normal, stop engine immediately and notify Unit Maintenance


Oct 16, 2009 | 1999 GMC Jimmy

2 Answers

Oil gauge won't stay up


It sounds like most likely its your Oil pump, if you have no pressure at stop and when you hit gas it sets the C/E light off, Guages in dash wont set off Check Engine Light. Replace Oil Pump.

Sep 03, 2009 | 2000 Jeep Cherokee

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...