Question about 1994 Chevrolet K1500

Open Question

How to remove shift knob

Trying to see if there is a way to disassemble my shifter knob on my 94 Chevy manual shift truck

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 9 Answers

SOURCE: change drivers side door panel on 94 chevy p.u.

unscrew the inside handle and pop of the window arm....then slowly work your way around the panel poping loose the plastic rivits on the inside edge...lift panel upwards to unhang it from window lip...thats the plastic panel...the metal panel inside that is pretty self explanitory..unscrew and take off the clips holding the controle arms to it and remove...do use caution as parts are very sharp and will slice your fingers and hands.

Posted on Feb 01, 2009

Ad
  • 274 Answers

SOURCE: 97 chevy truck 1500 gear shift gets stuck in park

You can remove the interlock off the gear shift or maybe spray some crc on it otherwise probably a loose wire or switch

Posted on Jul 10, 2009

  • 28 Answers

SOURCE: How do you remove the shifter knob on a 2000 Chevy

Well it either screws off, depending on the supplier, or look for a small clip pushed into the shaft through the knob.

Posted on Nov 12, 2009

  • 1810 Answers

SOURCE: Can you put a steering column from a 1997 c/k 1500

pick up a chilton book from chapters indago and check the diagrams they might be similar but i believe the wiring is a lot different '
it is likely you will need both manules

Posted on Jan 08, 2010

  • 91 Answers

SOURCE: removing shifter knob on 07 chevy equinox

There is a set screw under the crome ring at the bottom of the shifter knob. use a small flat screw driver and pry down on the chrome ring and it should come down and the set screw is under the chrome ring

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alright I have a few problems here. I have a 1987 dodge d50 manual transmission.. so the shifter linkage is really loose need some advice on how to tighten it? Also I can't shift in to 4th


I had a 1984 D50 years ago with a manual transmission. If I remember right, there is a boot covering the lower portion of the shift lever, and the boot was held in place by a frame screwed to the floor. If you remove the screws, and the knob on the shifter, you should be able to lift the boot and frame up off the shifter. Look where the shifter goes into the transmission, and see if there are visible bolts. Make sure these bolts are all there and are tight. (Don't force the bolts tight - make sure the shifter is located in the transmission properly.)
If the bolts are there and are all tight, then you have some problems internally in the selector rod(s) and/or shift forks, and the transmission will have to be removed and disassembled to repair it.

Nov 27, 2016 | Dodge Cars & Trucks

1 Answer

Does anyone know a possible way to remove the shift knob on my 94 passport? I bought a new knob and want to replace it, but I can't figure out how to take off the old one. I tried to just turn it left


knobs screw on normally and there is a small locking nut underneath the knob . IT could look like a taper ring to finish off the knob but it should turn down the lever to release the knob.

Apr 03, 2014 | Honda Cars & Trucks

1 Answer

Shifter broken


is this a colum shift or a floor shift..

Dec 31, 2013 | 1995 Chevrolet C1500

1 Answer

How do you remove the shifter knob on a 2000 Chevy


Well it either screws off, depending on the supplier, or look for a small clip pushed into the shaft through the knob.

Nov 12, 2009 | 2000 Chevrolet Silverado

1 Answer

My truck is 1995 chevy 1500 v8 the shifter will move but wont shift


If it is a standard shift the shift linkage is broken and must be repaired. Get a Haynes repair manual it will walk you through step by step exactly how to disassemble the shifter linkage there is not enough room on this forum to give you the info.

Nov 06, 2009 | 1995 Chevrolet C1500

1 Answer

Shifter knob removal


If it's a stickshift, many come off by prying out the shift pattern plate on top, there is a nut underneath. Best done when it's warm...colder it is the harder it is to remove. (use small screwdriver and pry up)

Oct 01, 2009 | 2004 Jeep Grand Cherokee

1 Answer

How can I remove gear shift knob on a 2003 Navigator?


it looks like you disconnect the shift cable and remove the center console finish panel with the shifter.


SECTION 501-12: Instrument Panel and Console 2003 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Floor Console —Front, Navigator Removal and Installation
  1. Apply the parking brake.
  1. Position the front seat forward.
  1. Remove the two front floor console rear bolts.
  1. Position the front seats rearward.
  1. Disconnect the battery. For additional information, refer to Section 414-01 .
  1. Remove the pin-typ retainer and the window control switch panel.
    • Disconnect the electrical connectors.
  1. Move the shift lever to NEUTRAL and position the shift indicator bezel aside.
  1. Remove the screws and the center console finish panel.
    • Disconnect the electrical connectors.
  1. Disconnect the shift cable.
  1. Disconnect the front floor console electrical connectors.
    1. Loosen the electrical connector bolt.
    1. Disconnect the connector.
    1. Disconnect the electrical connector.
  1. Remove the front floor console side finish panel.
    • If equipped, disconnect the electrical connector.
  1. Remove the front floor console front bolts.
  1. Remove the floor console.

Apr 17, 2009 | 2003 Lincoln Navigator

1 Answer

92 Miata transmission shift boot replacement


The lower shifter boot is attached to the transmission by 3 10mm bolts. You will need to remove to center consoule and the upper shift boot that attaches to the car to be able to remove the lower boot. Then you can replace the lower boot.

Dec 21, 2008 | 1992 Mazda MX-5

1 Answer

Manual shift knob removal for chrysler crossfire


I think there is a set screw in the side you have to loosen and then unscrew knob

Oct 18, 2008 | 2006 Chrysler Crossfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...