Question about 1985 Dodge Ramcharger
Posted by Anonymous on
Tips for a great answer:
Trace the spark plug wires to the distributor; it will be at the back of the engine block, in a cramped space.
Disconnect the negative battery cable to the distributor and unhook the air cleaner tube. Unscrew or unhook the clamps holding the distributor cap in place, and unscrew the Camshaft Position (CMP) sensor connector with a screwdriver.
Matchmark the distributor housing and the rotor for later realignment, as well as the distributor housing and the intake manifold. Unbolt the holding clamp and remove the distributor.
Set the engine at Top Dead Center (TDC) mark of the No. 1 cylinder compression stroke with a socket with breaker bar (long-handled ratchet).
Install the Ram distributor, replace the clamp and lightly tighten the bolt. The distributor part number is A1303801 from Parts Train, but numbers differ from different manufacturers. Order using the model, year and engine size.
Turn the distributor in its seating so the rotor lines up with the No. 1 cylinder mark on the Camshaft Position (CMP) sensor. Bolt the clamp bolt to 200 foot pounds (22.5 Nm).
Reattach the CMP sensor connector and use the screws or clamps to replace the distributor cap. Connect the air cleaner tube and the negative battery cable
Aug 19, 2016 | Dodge Cars & Trucks
Nov 27, 2012 | 1999 Volkswagen Cabrio
Aug 05, 2012 | 1986 Toyota Celica
Jun 24, 2012 | GMC K1500 Cars & Trucks
Nov 22, 2010 | 1995 Toyota Camry
Oct 02, 2010 | 1995 Nissan Quest
Aug 17, 2010 | 2003 GMC Sierra 1500
Apr 05, 2010 | 2000 GMC Jimmy
Mar 16, 2010 | 1996 Nissan Sentra
Feb 17, 2010 | 1999 Honda Civic
Aug 16, 2017 | 1985 Dodge Ramcharger
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: