Question about 2005 Buick LaCrosse

Open Question

Buick lacrosse axle nut torque

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Ironfist109
  • 3018 Answers

SOURCE: 2000 buick lesabre axle nut


  • You don't need to use a torque speck really on an axle bolt. Just snug it by hand real good and make sure to stick a new cotter pin in through the axle and axle bolt to prevent the bolt from self un-threading. That all I have really ever done.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Posted on Aug 01, 2011

Ad
  • 73 Answers

SOURCE: torque specs 2005 Buick Lacrosse front lug nuts

164lbs

Posted on Mar 01, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a hub in a 2005 Buick Terraza


remove tire/wheel. remove brake caliper/ bracket. remove center axle nut. remove 4-hub nuts. hub should come out with hands. Grease and red-torque all appropriate parts during reassembly.

Mar 18, 2016 | 2005 Buick Terraza

1 Answer

I have a 2000 Buick lasabre when driving slow I can hear cracking noise left front tire I replace the HUD assembly and put new tires on front


Make sure wheel nuts are tight and torqued properly. Inspect hub assembly bolts and axle nut for proper torque as well

Jul 12, 2015 | Buick Cars & Trucks

1 Answer

2005 Buick Lacrosse Rear Lugnut Torque Specs


most cars this is in the operators guide(glovebox) lost?
sure.
bet one at Buick. free.
3rd google hit.
and
http://www.vadengmpp.com/owners-manual/buick/2005-Buick-Lacrosse.pdf

page 5-92

nor more guessing its there. always was...

Jul 19, 2014 | Cars & Trucks

1 Answer

NEED TO STOP OIL LEAK ON DRIVE AXLE ON BUICK LACROSSE 2006


you need to replace drive axle shaft seal on side of transmission.

Oct 24, 2012 | 2006 Buick LaCrosse

3 Answers

I cant get the front hub assembly off my 03 buick rendevous


Items/Tools needed:

35mm or 1 3/8" axle socket
3/4 or 19mm socket for lug nuts or lug wrench
15mm socket for brake caliper and bracket
13mm socket for wheel bearing bolts (extentions as well)
Breaker bar or impact wrench to remove lug nuts and axle nut (Note: Do not use impact driver to install axle nut).
Torque wrench for axle nut
Hub puller - Optional
Hammer

Directions

1. Jack the appropriate side of the car up. Make sure the rear wheels are blocked and/or set the parking brake. Use a jackstand to support vehicle at subframe for safety.
2. Remove wheel.
3. Remove brake caliper and bracket.
4. Remove rotor.
5. Using 35mm axle socket, remove axle nut, turn counterclockwise. You will either need an impact or a long breaker bar. They are installed with a lot of torque or may be rusted out or corrroded.
6. Push the axle back as far as possible. It won't come all the way out or through the hub, but will become loose. You can either get a tool that will push it out like a hub puller, or just use a hammer making sure not to hit the axle shaft threads and damage them. Put the axle nut back on the axle shaft so it is flush with the top. Then place 35mm axle nut socket on the axle nut and tap on the 35mm socket with the hammer not the threads on the axle shaft spline.
7. Disconnect the wheel sensor connector and then remove hub side connector from the bracket (unclip).
8. Take a 13mm socket with extensions as needed and remove the 3 bolts on the backside of the bearing around the axle. Be sure to use PBBlaster to help loosen the bolts.
9. The hub/bearing should come loose without need needing a hub puller. Be sure to note the sheet metal spacer between the hub and spindle with also has the bracket for the wheel sensor connector.
10. Double check both parts (hubs) to make sure they match.
11. Lube the axle shaft splines with good quality bearing grease before installing the hub. Clean off any old grease and crud first.
12. Install the hub assembly with the wires from the bearing at the bottom. Line up hub splines with axle shaft splines and push in on hub. Note: Don't forget that sheet metal plate between the spindle and wheel bearing. Note: Make sure the wheel sensor wires don't get pinched by the axle shaft.
13. Install the 3 13mm bolts to 96ft lbs. Service manual recommends replacing with new ones. Some hubs like AC Delco will come with new bolts which have threadlocker.
14. Install the axle nut. As tightened down it will pull the driveshaft the rest of the way in. Torque axle nut to GM specs of 159 ft-lbs or the figure specified by the hub manufacturer. It is recommended to use a new axle nut but not necessary.
15. Install the rotor, brackets and caliper. Torque caliper bracket bolts to 137 ft-lb and caliper pin bolts to 63 ft-lb.
16. Install the connector to the sheet metal bracket and reconnect both connectors.
17. Install the wheel. Torque lug nuts in a star pattern at 100 ft-lbs each.
18. Road test car and ensure any ABS and TRAC OFF light are off.

Sep 18, 2011 | 2003 Buick Rendezvous

1 Answer

Torque specs 98 riv replacing wheel hub assy


Hello blboyer0,

The torque for the axle nut is 107 ft. lbs. The hub bearing bolt should be torqued to 70 ft. lbs.

I hope this helps.

Regards,

netvan

Aug 07, 2011 | 1998 Buick Riviera

1 Answer

2000 buick lesabre axle nut torque



  • You don't need to use a torque speck really on an axle bolt. Just snug it by hand real good and make sure to stick a new cotter pin in through the axle and axle bolt to prevent the bolt from self un-threading. That all I have really ever done.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 01, 2011 | 2000 Buick LeSabre

Not finding what you are looking for?
2005 Buick LaCrosse Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...