Question about 2003 Nissan 350Z
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had the same indications on My 2000 Maxima but the engine was also running rough . I replaced the number 3 cylinder ignition module and all of the spark plugs and all of the error lights are back to normal I had to reset the check engine light by disconnecting the battery for about 15 minutes.By the way my car has 253,000 miles on it so if you have a lot of miles on your car you might want to check all of the ignition modules so pull your spark plugs and read them they might tell you where your problem is .
Posted on Dec 24, 2008
SOURCE: TCS, SLIP and ABS lights on
Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one of the rear ABS sensors. You will need to plug it in and find out which side it is. That's really the only ABS issue that car has. One of the rear ABS sensors fails.
Posted on May 09, 2009
The oil change wouldn't cause this problem. Just in-case, check the engine oil level.
There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.
Posted on Oct 11, 2009
Testimonial: "very helpful. i have the mechanic checked the car , the sensor says it has a malfunction in P0340"
Tips for a great answer:
Jun 13, 2011 | 1991 Mercedes-Benz 420
May 11, 2011 | Oldsmobile Silhouette Cars & Trucks
Feb 07, 2010 | 2003 Chevrolet Tahoe
Mar 26, 2009 | 1998 Cadillac DeVille
Feb 23, 2009 | 2000 Oldsmobile Intrigue
Jan 31, 2009 | 2001 Jeep Cherokee
163 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: