Question about 2010 Dodge Nitro

Open Question

Dodge nitro window drivers side

Driver side window will not roll up at times

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tommyjg
  • 1 Answer

SOURCE: windows dont work

First I would check the fuse, if it is burned then it means there is a short in the system. It must be found and repaired before you can continue to check the rest of the power window system. If the fuse is burned, I would first suspect the power window switch,the power window relay, and last but not the least, the electric. motor. 1 time out of 100,000 or more times a wire if chafed or rubbing causing a short.

Most likely this is the case from what you tell me. Get yourself if you don't have a voltmeter or, just a 12 volt test lamp. First remove the door cover screws, door handle, locks etc., also remove the screws in the door switch drivers side. Then on the bottom of the door using a wide flat head screw driver gently pop the plastic tabs out so it don't look hacked. If your using a test light, connect one end, most of the time it's an alligator clip, connect it to a good ground, the door cross brace itself is a good ground and make sure it does not have paint on it. Touch the end of the light to the positive side of the battery to make sure the test light works OK. Connect the the light/lamp end to all the connections on the bottom of the power window switch ( drivers side ), one switch at a time, pushing the switch on and off to make sure all switches have power to both sides when button is pushed, if the test light lights while pressed on, then the switch's are good. If the switch tests good then I would have no problem buying a power window relay. Your Drivers side switch controls all windows that's why you check the power to that switch only. I would change the relay first if the fuse is OK because it's common to be the relay but, one never knows. I hope this is not too confusing but, it beats paying $$$$$$$$ to a dealer or repair shop if you can fix it yourself. And I have a feeling this is a easy fix. Good luck with your repair....tommyjg

Posted on May 22, 2009

Ad
  • 145 Answers

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Posted on Jun 08, 2009

  • 57 Answers

SOURCE: drivers side window won't roll up

check for power at that window motor plug behind door panel while operating window switch. No power? replace window switch. Have power? replace motor.

Posted on Dec 02, 2009

  • 3 Answers

SOURCE: 2005 dodge stratus driver side window inop How do

have you found a solution ? mine are all stuck in up possition

Posted on Jul 11, 2010

SOURCE: windows will not work

I had the same problem with my '04 SXT only it wouldn't roll up. I held the switch and slammed the door and it worked. Not sure how long or how many times this is going to work, but it works for now.

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the window on the driver side of a 2008 Dodge Nitro to get to the door lock rods


Most windows are attached to the window regulator assembly using two bolts. Roll the window up/down until you can visually see them. They have a head size of 10mm. Remove the bolts and the window will seperate from the regulator and remove the glass from the door channel.

Jun 21, 2015 | Dodge Cars & Trucks

1 Answer

Is there a special fuse for my front power window and mirrors on my 2008 dodge nitro


See pages 381 to 388:
http://cdn.dealereprocess.com/cdn/servicemanuals/dodge/2008-nitro.pdf

If can't run windows or mirrors from the driver's side, maybe power switch is defective.

Mar 03, 2015 | 2008 Dodge Nitro

1 Answer

How do I fix the driver side window?


Keep slamming the door, you will
surely have more problems

Remove the door panel,see the problem & resolve it

I would guess you have a broken window regulator to replace

Dec 05, 2014 | 2006 Hyundai Santa Fe

1 Answer

In my 2001 Dodge Stratus, both my back windows & driver windows will not roll down. But passenger window will roll down with driver switch. Also, the doors won't lock on driver side, but will on passenger...


I had this same problem I changed the master switch in the driver door and it fixed the windows and it may be your power lock switch there to.

Aug 12, 2013 | 2001 Dodge Stratus

1 Answer

Firing order for dodge nitro 08


Should be the same as a Dakota.
The firing order is 1-6-5-4-3-2
The odd cylinders are on the driver side with number 2 being the front cylinder on the passenger side.

Apr 14, 2013 | 2008 Dodge Nitro

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

1 Answer

2001 Pontiac Grand Prix 2 dr GTP My driver side electric window will go down only if I roll down the passager side at the same time. It is then difficult to roll up, I have to prees hard on the driver...


You will have to remove the button cover with a flat tool such as a screw driver, and use alcohol with a cotton swab to clean the electrical contacts.

Oct 02, 2010 | 2001 Pontiac Grand Prix

Not finding what you are looking for?
2010 Dodge Nitro Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...