Question about GMC Savana

Open Question

Turn signals not work hazard lights checked fuse

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 85 Answers

SOURCE: my hazard lights and turn signals stopped flashing

i bet you have a bad multi function switch or turn sig switch. good luck

Posted on Nov 23, 2008

  • 15 Answers

SOURCE: No turn signals, hazards or brake lights

replace the turn signal switch in the steering column

Posted on May 16, 2009

cadman000
  • 607 Answers

SOURCE: bottom brake lights and hazard lights do not come on. All other lights work including top brake lights. Fuses and bulbs checked.

Check for power out of brake light switch by brake pedal. Of its faulty , the 3rd brake light will still work. Hope this helps

Posted on May 23, 2009

  • 74 Answers

SOURCE: Turn signals hazards and brake lights are not working fuses good

did u check fuses under the hood on driver side lol yes ford has them thear also

Posted on May 24, 2009

  • 412 Answers

SOURCE: Have hazard lights but no running or turn signals

sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

Turn signals wont work but flasher an lights come on


If the hazard flasher is working but the turn signals aren't, the problem is most likely either fuse A11 or the #2 relay in the trunk fuse block. However, if these check out, the problem could be either the turn/hazard switch assembly or the turn flasher module.

If both the turn signals and hazard flasher are not working, the most likely problem is the turn/hazard switch assembly.

May 26, 2015 | 1994 Cadillac DeVille

1 Answer

Fix signal lights


If the hazard flasher is working but the turn signals aren't, the problem is most likely either fuse A11 or the #2 relay in the trunk fuse block. However, if these check out, the problem could be either the turn/hazard switch assembly or the turn flasher module.

If both the turn signals and hazard flasher are not working, the most likely problem is the turn/hazard switch assembly.

May 03, 2015 | 1996 Cadillac DeVille

4 Answers

Turn signal lights don't work


The first place to start are fuses, check your owners manual for location, typically left side of dash.

The emergency (hazard) flashers and turn signals are on separate fuses and run through the hazard switch. If all the lights work when the hazard switch is on then the problem will likely be a blown turn signal fuse.

Other possibilities are the hazard switch itself is bad, the turn signal switch is bad or a broken wire, all of which require a meter (or test light) wiring diagram and knowledge of the circuit to test it - better to have it done.

Robert Grove
Mobile Mechanic Malibu 310 651 8020 Auto Truck RV Mobile Repair...

Aug 09, 2014 | 2002 Chevrolet Impala

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

I have a 2005 GMC w-4500 cab over box truck. The turn signals do not work. I have checked the fuse in the glove box, checked the flasher under the dash. The hazard lights work, but neither turn signal.


that could have two flashers one for the turn signals and one for the hazards lights.if you turn the hazard lights on and the flasher you located, you should feel it click as the lights flash.if it does it could possibly have another one for turn signals. sometimes it is a square relay in the fuse panel. and could be a problem with the turn signal switch this is the same as a isuzu npr.

Sep 15, 2011 | GMC W3500 Cars & Trucks

1 Answer

Turn signal does not work


Hi there,

I'm assuming neither of your turn signals work?

Firstly, check the 15A Turn fuse in the fuse box. If fuse is ok, then operate your HAZARD light function.

If no Hazard lights operate, then suspect a probelm with the Turn Signal Flasher unit.

If Turn signal flasher tests ok, then fault lies within the Turn switch.


"If this has helped you in any way, please rate this solution"

May 02, 2010 | 1998 Buick Riviera

1 Answer

Turn signals won't come on inside or outside of car but hazard lights come on inside and outside of car


Check turn signal fuse, if fuse is good, check turn signal flasher, this is identical to hazard flasher, I believe on the 1997 it is located under the dash near the center console. The turn signal and hazard flashers are the same part number so try switching places with them and see if the turn signals work. If turn signals work after switching them you need a flasher.

Nov 09, 2009 | 1997 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...