Question about 2007 Chevrolet Uplander

Open Question

Hub nut size uplander 2007

What size is the hub nut

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

  • 24 Answers

SOURCE: how to change front wheel hub assembly in a 2006

after you take the tire and everything off there should be a large nut in there hopefully you have a big enough socket anyways after that is done pop out the ball joints and possibly tierod once you are in there you should be able to see if you need to anyways most important make sure the vehical is supported by jackstands dont count on a jack alone and slide a nice size v-block under the opposite back tire just for assurence

Posted on Oct 10, 2009

  • 599 Answers

SOURCE: 2005 Chevrolet Silverado 1500HD 4 wheel drive

177 ft lbs

Posted on Dec 09, 2009

  • 74 Answers

SOURCE: What is size of hub axle nut on 2002 chevy s10?

2002 chevy S10 ZR2

36 mm.
Torque 103ft pounds.

Posted on Mar 16, 2010

Testimonial: "Great, thank you! At 7 to 15 bucks a pop for one socket, it helps to buy the right one the first time."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear bearings


As I said, all wheel bearings are replaceable. Remove the bearing cover, remove the split pin, undo the castleated nut, remove the hub. Push the bearing out from the rear. There is usually a small ring of bearing seat visible from the rear. I used to use a large socket with the extension bar and a good sized hammer with the hub on a block of wood.

Nov 24, 2015 | 2007 Kia Sorento 4x4

1 Answer

What size socket do i need for the drive axle/hub nut for a 1997 Chevrolet Cavalier?


I think that one is a 32mm...could b wrong tho..
I'd grab my 32 and 36 if I were going to take it off without looking

Sep 02, 2014 | 1997 Chevrolet Cavalier

1 Answer

How to replace broken lug nut studs on a


lug studs are pressed in from the back of the hub flange so clear access to the hub and behind it . use a hammer and drift ( punch) knock the broken bit back towards the inside of the hub flange . Place a new stud in position ( splines may line up a bit with marks already in the hole) use the nut and a series of washers and tighten the nut . It will pull the stud into the hub. If you want to do it another way ,take the hub off, knock out the broken bit, place the hole over a piece of pipe and insert the new stud. use the hammer to drive it home

Aug 30, 2014 | Chevrolet Uplander Cars & Trucks

2 Answers

What size is axle nut for a jeep compass


Depending on the year, it is either a 32mm or 36mm. Most likely 36mm.

Jun 30, 2014 | 2007 Jeep Compass Limited

1 Answer

Ba falcon hub nut size


Hi just replaced the hub on 2000 au the size of the hub is 36mm the metal jacket has to do with the tension i think hope this helps cheers.

Jun 07, 2014 | 2005 Ford Falcon

1 Answer

2006 Chevy uplander front axle nut torque specs


118 hub nut !!hub bolts are 96 ftlbs.177 and even 144 is to high,you can find them on line to be sure,

Jan 12, 2014 | 2006 Chevrolet Uplander LS

1 Answer

Torque specs bearing


Honestly you should search google. It is right there. the inner hub nut must be torqued to 59 Nm rotate the hub three times in each direction and then loosen the inner hub nut until it can be turned by hand, then again tighten the inner hub nut to 25 Nm. the lockwasher against the inner hub nut, it only goes in one way, it has a small inner tab that locates with the key way of the hub, this is between the threads. Once the lock washer is in the correct position, you can now install the outer hub nut, this outer nut must be torqued to 47 Nm, once you have tightened this outer nut, please once again check that the starting effort is correct.

Oct 18, 2013 | 2007 Toyota Hilux 2.5

1 Answer

Hub nut size 99 chrysler cirrus


it takes a 32mm socket to remove front hub nut on these vehicles

Sep 18, 2009 | 1999 Chrysler Cirrus

1 Answer

Rear wheel hub nut


I used a 32 mm to remove hub nut on front. I guess it would be the same for back hub nut.

Aug 11, 2008 | 2001 Kia Sephia

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...