Question about 2006 Cadillac CTS 3.6
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If there is not a 1 2 on the door arm above the window switchs then you do not have memory seats.
I have a 04 CTS and is like yours, no memory seats.
Posted on Mar 25, 2009
There is an aluminum bolt head on top of what looks like a metal can on the top side of the engine. Its near the fill tube and dipstick - drove me crazy, too!
Posted on Jul 30, 2009
Do nothing if everything seems OK. Drain and refill, but never flush, you will stir up gunk in the pan, if you have hard or sluggish shifts
Posted on Jul 01, 2010
tod34 is correct. The "fill" area of this transmission is located on the transmission itself. It is a fluid leveling plug located low on the main case toward the back of the trans. You must pump the fluid in through that hole. If you are on level ground and the transmission is properly warmed, you should fill the transmission until the fluid level is flush with the bottom of the hole (starts spilling out)
Posted on Sep 08, 2010
SOURCE: Had brake hose and electronic
I am not sure why the brake control module was replaced but it is located in the engine compartment on the right front fender.You will have to jack the vehicle up to get to it.Just follow the brake lines.The module has to be programmed after replacement.Also the brake pedal position sensor has to be calibrated.This has to be done at the dealership.The first thing you should do is get the codes and let me know what the code is.I can get back to you and let you know what the next step you should take.Just because the light is on does not mean you have to replace the electronic control module.That is why it is important to get the codes first.Hope this helps.Good luck.
Posted on Nov 10, 2010
Tips for a great answer:
Mar 17, 2017 | Cadillac Cars & Trucks
Dec 04, 2013 | 2006 Cadillac CTS
Jan 22, 2013 | 2005 Cadillac CTS
May 30, 2012 | 2004 Cadillac CTS
Dec 26, 2011 | 2003 Cadillac CTS
Jan 10, 2011 | 2005 Cadillac CTS
Dec 28, 2009 | 2006 Cadillac CTS
Jan 07, 2009 | 2004 Cadillac CTS
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: