1992 Audi 100 Logo

Related Topics:

A
Anonymous Posted on Apr 21, 2014

Door panel take the drivers side door panel off to get to the electric window

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jul 21, 2010

SOURCE: My drivers door electric window has come apart from the

The problem is more than likely that the window regulator blocks have broken. They're just made of plastic. They are the pieces that are attached to the bottom of your window and actually attach it to the small metal cable that lifts and lowers the the window. You can get new stronger ones from your local Audi dealer for around $10 a piece (2 per window). I just changed mine out today and it took me about an hour. I'll attach a Youtube link that shows you exactly how to repair the problem. After watching this video, I repaired my own. http://www.youtube.com/watch?v=9UP1Rn7Wj3s&playnext_from=TL&videos=MdxL5eeE9-Q I hope this helps. The fix is easy, probabley a 3 on a 1 to 10 scale of difficultey. And save yourself $300-400 doing it yourself.

Ad

raj somaiya

  • 5370 Answers
  • Posted on Mar 02, 2012

SOURCE: 1999 a6 avant passenger side door panel removal

For Doors not getting open with remote or key problem, there are help links provided below. Click the link below to go through its procedure and troubleshoot the problem: ----
Drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html


----------
Central locking not working?

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html



For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html

-------------

Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My passenger side electric window stopped working on my 1991gmc sierra 1500. The passenger side switch panel don't work for the window but works for the lock. Driver side master switch doesn't work for the...

The odds of both switches going bad at the same time is high, remove the door panel and tap on the window motor with a hammer, while trying the switches. I may have jammed up. Ground a test light and check the motor connection, while trying the switch, power will show on either side depending on if it turning up or down

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_4c166ba81493f541

0helpful
1answer

Can't operate electric window on driver's side door

The door panel will have to come off. check for a bad motor or wiring to motor, or a bad drivers side switch. check the fuses first! and is the drivers side window locked on drivers side, just push the unlock window from the master controls on drivers side to see if it works. on my car, the drivers side window would not work. I accidentally hit the window lock with my arm. God-Bless!
2helpful
3answers

2000 Buick Lesbre - Intermittant electrical: Door

THE PROBLEM SOUNDS LIKE LOOSE WIRING CONECTIONS IN THE DRIVERS DOOR , BEST THING TO DO IS HAVE A LOOK OPEN UP DOOR PANEL AND CHECK ALL CONECTIONS, GOOD LUCK
0helpful
1answer

Fallen driver's side window

probably need a new window regulator. ebay. 93 to 98 should fit.

Section 01-05: Trim, Interior 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  1. swv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942) .




  1. If equipped with manual windows, slip a clean shop rag between the window regulator handle (23342) and the front door trim panel .
  1. Pull the shop rag back and forth to release the window regulator handle clip.




  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screws from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124) .
  1. Remove the front door trim panel.
Installation
To install, reverse the removal procedure.
---------------------------------------------------------
Window Regulator, Power Front Door
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Remove the front door window glass (21410) . Refer to the front door window glass removal procedure in this section.
  1. Remove the two front door brace bolts and the front door brace.


    415712f.gif

  1. Disconnect the front window regulator electric drive electrical connector.
  1. Remove the four front door window glass regulator track bolts.

    67b6136.gif


  1. Remove the three front window regulator electric drive bolts.
  1. Remove the front door window glass regulator track and the front window regulator electric drive (23394) as an assembly through the opening in the front door (20124) .
Installation
  1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front door .
  1. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
  1. Install the four front door window glass regulator track bolts. Tighten the front door window glass regulator track bolts securely.
0helpful
1answer

Window one operate but can operate passenger side from driver

Ford was notorious for bad switches on the drivers window control panel. But before you replace it pull the whole inner door panel off. You will have to unplug the switch panel to do it... check the connections on the window motor itself, then check and clean the connector that plugs into the inner door panel and the switch panel itself, If these dont fix it check an auto boneyard for a replacement switch... AAlso if you are savy with automotive electrical, CAREFULLYcheck the motor operation with a jumper wire replacing the switch to ensure it isnt a bad motor... most likely it is the switch but Murphy's law has a whole subset of rules for automotive electrical applications...
0helpful
1answer

Unable to remove adriver's side door panel containing electrical

You have to remove the door panel. To do so, you need to remove all screws visible. Next, remove the panel by popping off the door panel itself. You need a tool sold at the auto parts store....looks like a funky type of screwdriver. You slip it in between the door and the door panel and pop the plastic "buttons" loose. Make sure you look for all the screws so you are not yanking on a fastner that is still attached.

Then you have to lift up and wiggle at the same time.
0helpful
1answer

HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?

Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.
1helpful
1answer

Drivers side electric window does not work

Remove the door panel and disconnect the motor from the window, but leave it plugged in. See if the motor works. If it does you should grease the tracks on the window. If the motor does not work then you should replace the motor. The motor will probably get hot when you try working it.
0helpful
1answer

All of a sudden the driver side window will not roll up.

is it electric windows? if it has electric windows does the passenger window roll up using the switch for it on the passenger door panel? if it works on the passenger door panel and not on the driver's door panel , then your switch on the drivers door panel is bad... replace it.
2helpful
1answer

REAR DRIVER'S SIDE DOOR PANEL

There are most likely a couple of screws mabye hidden under a little plug or plastic cover around the door handle and on the under side of the panel.Then if it is a crank style window you will have to remove the window crank handle,after that there are plastic panle pop clips you will just have to pull on panle and they should pop out,then lift the panle up off the window door seal.
Not finding what you are looking for?

53 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...