At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
well you leaking gas either from your fuel pump tank float assembly inside the tankand gasket is bad that seals the fuel in or possibly a bad fuel neck aka filler tube also check your fuel lines and make sure all clamps are tight
I believe it firing order is 1-4-2-3 (where cyclinder #1 is the closest to the fire wall) and your distributer has the plug wires running almost vertically.
1st cylinder = the very bottom
4th cylinder = second from the bottom
2nd cylinder = second from the top
3rd cylinder = the top connection on the distributer.
hi,my lamp goes on most of the time.i use to disconnect bat. and then all 3 connections to obdII,but after a while it comes on again.i believe to clear the computer with a scannertool.peter ,sweden
you will need to replace your master cyl and bleed your brakes
your master cyl is bypassing inside or the seal are bad inside the master cyl
there isnothing slse in the system that could cause this unless you are loosing fluid.
good luck
×