Question about 1984 Chevrolet Sportvan G30

1 Answer

How do you remove the front caliper on a 1999 C 30 van

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

There should be two Allen head style bolts holding the caliper on. these will be on the inside (towards springs) of the caliper. They can be rough to remove. If they have been on quite awhile take some penetrating oils in an old style squirt can and oil the ends of the threads and let them sit for awhile.

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front disc brake pads on a 2009 Dodge Journey?


remove the front wheel and support the van then remove the two bolts that hold the caliper then remove the old pads then using a clamp or big channel lock plies press the caliper piston in so the caliper can go on after you put on the new pads after you would of replace your wheels pump up your breaks and check to see if you need to put in some more brake fluid

May 03, 2014 | 2009 Dodge Journey

2 Answers

Breaks all are sticking on at once


There is air in the system that keeps pressure on the wheel cylinders even though you take your foot off the brake pedal.

Bleed the system.

Sep 16, 2012 | 2006 Dodge Grand Caravan

2 Answers

I have a dodge ram 250 van 1987, front brakes are locking up by themselves , not touching the pedal,, when moving until the van stops completely ,, not able to move because front wheel are locked or when...


Most often that condition is caused by the rubber hoses that connect the caliper to the "hard" brake lines at the chassis. The hose may appear good but internally it collapses and prevents pressure from releasing. After correcting the problem be sure to replace the front pads as likely they are burned. If the pedal pulsates replace the front rotors as well, or, if they are still in relatively good shape, have them re-surfaced.

Apr 06, 2011 | 1987 Dodge Ram Wagon B250

1 Answer

I need to replce my rotor's on an e-250 van. How do I remove them?


Place van in park and place chocks behind the rear wheels. Jack up the van and place two jack stands underneath the frame. Remove the front tires. Loosen the bolts holding the caliper assemblies and use a large flat screwdriver to pull the caliper 1/16 in. Remove the bolts holding the calipers and pads and set the assembly up out of the way. Do not put any strain on the brake lines. Take off the bearing caps. Remove the cotter pins and wheel bearing nuts. Pull the rotors off. Inspect and have them machined or replace them with new.

Mar 25, 2011 | Ford E-250 Cars & Trucks

1 Answer

Changing the rear disk brakes on a 06 toyota sienna, what is the process?


-Set up jack and properly block front tires.

-Do not set parking break as this may hender removing the rear calipers. Open hood and remove the brake resevoir cap.

-Remove hubcaps if applicable,

-Loosen Lugnuts but do not remove,

-Jack up van,

-Remove tire.

-Caliper should be visible. There are two bolts or hex heads on the back side that can be a pain to remove sometimes.

-Pull the caliper off the rotor, It is recomended to have the rotors turned or replaced. With the old pad still in place, take a c clamp or brake caliper squeezer and compress the caliper

-remove old pad, take note for the reinstall of the new pad.

-reverse the steps. This is a simple break down. Hope it helps

Feb 07, 2010 | 2006 Toyota Sienna

1 Answer

How do you change the front brakes on a 1984 chevrolet van?


remove tire, then remove caliper mounting bolts,caliper might be a little snug to get out just pry it off with something without harming any components. remove old pads then use a c clamp and squeeze piston all the way back in put new pads on and reassemble the way you took caliper off do not remove brake line

Jan 16, 2010 | 1984 Chevrolet Chevy

1 Answer

How do i replace front drivers side brake caliper?


Jack the van up, remove the tire. Then you will see the caliper. There will be 2 bolts that hold it on to the rotor. Remove the bolts and pry it off with a screw driver or what ever works. Then disconnect the break line from the caliper. After you get the new one use a c-clamp to press the piston down into the caliper and install the brake pads. Bolt the caliper back into place and install the line. Loosen up the bleed valve on the caliper 1/2 turn and have someone pump the breaks until no air bubbles come out. Once you have a smooth stream of brake fluid coming out the valve have that person pump once more and hold the pedal all the way to the floor. Then tighten the valve.

Dec 29, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...